- Joined
- Nov 19, 2024
- Messages
- 395
Just wondering if anyone else has had trouble with the CI pods speedometer. The included speed generator is very simple with only three wires, power, ground and a wire speedometer.
Their instructions say to make sure you have signal to speedometer before calibrating. The problem is there are no detailed instructions to trouble shoot the lack of signal other than to ensure the three wires are hooked up properly.
My gauge is hooked up properly, but there is no signal at the gauge. They sent another generator but it made no difference still no speedo. Everything else works fine just no speedo. They offer technical assistance but it did not help. If its not the generator it must be the gauge itself.
These are expensive units and it very disappointing they do not work when installed using their instructions.
Any advice would be appreciated.
Their instructions say to make sure you have signal to speedometer before calibrating. The problem is there are no detailed instructions to trouble shoot the lack of signal other than to ensure the three wires are hooked up properly.
My gauge is hooked up properly, but there is no signal at the gauge. They sent another generator but it made no difference still no speedo. Everything else works fine just no speedo. They offer technical assistance but it did not help. If its not the generator it must be the gauge itself.
These are expensive units and it very disappointing they do not work when installed using their instructions.
Any advice would be appreciated.
