WA Cleaning House

[zeeman1]

I'm finally ready to start slimming down the huge pile of stuff I have in my garage. I don't have a list of everything (old wiring harnesses, carbs, light covers, 66 rood parts, and rough hard top, etc...), but if you see something in the pics you want let me know and we'll get something worked out.

http://s491.photobucket.com/albums/rr280/zeeman227/parts 4 u/

 

[zeeman1]

Bumpitty. Tons of stuff sitting here waiting to go to the first bidder. I'm not greedy, just want it gone for at least enough to make we want to deal with going to the post office.

 

[stretch]

What pieces of new weather strip do you have? I would be interested. Any chance that you have orginal seats and/or tracks?

 

[brocken]

Hey Zee, do you have any stock wiper arm assemblies that have the ridges on the studs? My wiper assembly just has round studs and looks like the ends are missing.
I got the wiper assembly lengthened by Redleg to fit my vacuum frame but need to replace those studs that attach to the frame.

 

[bighoss22r]

I think I might want the black arm rests. How much you want for them?

 

[sufa114]

i could use the tailgate

 

[Z-Man]

How much for the 66-68 turn signal, lenses & shipping to 97141? Thanks, Terry

 

[nirvana]

need hard dash for my 71

dont want the pad but the bolt in metal dash.
photobucket hit me with pop ups....i wont go back to it.
please let know if ya got anything, thanks

 

[zeeman1]

updated the pics a little and went through my boxes. I need to add to the list:

Gas tank frame mount brackets
Stock spare tire carrier w/ inside tub corner brackets and tailgate handles
D20 J-shift shifter
Liftgate handle
Tank selector valve
Brake and Clutch pedals
Accelerator firewall bracket and ezualizer bar
Clutch Frame and block brackets
Carter competation Carb
New Axle side rear shock brackets and hardware for early axles
3 plastic aux. gas tanks

other misc. odds and ends.

 

[zeeman1]

bumpitty bump

 

[67broncorebuild]

Z How much for the tailgate?? 2nd in line for it. I should have bought one when i got the tub from you.

 

[zeeman1]

pm sent...

 

[zeeman1]

she's yours 67. That is a manual steering box in one of those last few pics as well.

Come and get it!

 

[67broncorebuild]

Cool, i will get it next weekend! Do you happen to have a smooth steering column around?

 

[zeeman1]

i do actually. You were the one that wanted it before right? I have the column sitting in the garage, so did you want the whole thing?

 

[stingus]

interested in the cowl vent seal kit and inlet seals, a couple good knobs, and the K&N filter if its will work on my edelbrock 4barrel. Is this the complete seal kit for the cowl vent?
prices?


Thanks

 

[siderbox]

How bout those early inside door and window handles, tail light bezels, and 66 tail lights?

 

[zeeman1]

Stingus - Yip, it is the complete cowl seal kit, I can open it up and get better pics if you want. I'll get you close-up pics of what I have left for knobs, and I'll measure the air filter for you. We can work out a price when we know what all I can get you.

Sider - I still have all the door handles, but the 66 tail lights are gone now. I can get good pics of all those to you so you can make sure they are wat you want.

Anyone wanting pics of anything just pm me your address and I'll get them to you.

 

[67broncorebuild]

not the whole thing, just a smooth shifter bezel.

 

[stingus]

Sounds good, thanks!

Stingus - Yip, it is the complete cowl seal kit, I can open it up and get better pics if you want. I'll get you close-up pics of what I have left for knobs, and I'll measure the air filter for you. We can work out a price when we know what all I can get you.

Sider - I still have all the door handles, but the 66 tail lights are gone now. I can get good pics of all those to you so you can make sure they are wat you want.

Anyone wanting pics of anything just pm me your address and I'll get them to you.