Mike Hewett
Sr. Member
- Joined
- Mar 1, 2004
- Messages
- 358
I have a complete and well running (still in bronco) 302 engine with Howell EFI, attached to NP435 and Dana 20 transfer case that I would like to sell. I will provide the EFI related wiring harness and will keep in bronco until sold.
The engine is a remanufactured short block that I put an edelbrock cam in and the cylinder heads have larger chevy valves. The engine has less than 700 miles on it and probably fewer than 16 hours of total running time although it is about 5 years old.
I will included the Duff long headers and exhaust if you want with Flowmaster 40's.
Transmission was rebuilt as was the Dana 20 although the transmission leaks out the seal on the input shaft.
Transfer case is a T-shift dana 20
I have different plans for the bronco now!
402-676-6052 Thanks, Mike
The engine is a remanufactured short block that I put an edelbrock cam in and the cylinder heads have larger chevy valves. The engine has less than 700 miles on it and probably fewer than 16 hours of total running time although it is about 5 years old.
I will included the Duff long headers and exhaust if you want with Flowmaster 40's.
Transmission was rebuilt as was the Dana 20 although the transmission leaks out the seal on the input shaft.
Transfer case is a T-shift dana 20
I have different plans for the bronco now!
402-676-6052 Thanks, Mike
Last edited: