Do you think they would fit okay in a half cab?? Stock EB seats are all right for a few mile, but they don’t provide enough support. Plus, my seats are pretty much gonna need reupholstered.
X2 on Mustang seats, mine came out of a 90's ish convertible. I hammered flat the rear tabs on the back of the sliders (that came with the seat) and bolt and go. 2nd pic is 05-09 Mustang seats that also work.
I don't see why they wouldn't, I even used the mustang seat brackets, I just had to modify them slightly to make them line up with the bolt holes in the Bronco. The 94-04 mustang seats are dimensionally similar to the stock bronco seats, but are high back with a head rest
Can you get more pictures of these fusion seats? Door open and a few more angles. Wife just got a 2019 Fusion and that was the first thought that ran through my mind. They look like the perfect seat for the early bronco.
Sure - Here's one I had on my other PC - I'll get more this weekend when I get out in the garage & move some stuff around, I'm driving my 73 right now so the 66 gets buried until I want to work on it. I did remove the power stuff as that would make the base too tall & I used the original Bronco sliders. They bolted in easy & I also used the Fusion 3 point belts right to the rollbar & floor - works great.
What year of fusion are the seats from? They look like they fit well.
Pretty sure they were from a 2010 - they weren't in the car when I got them.
You removed the power stuff from under the seat. I was wondering how high the bottom sat up from the floor. Cant tell in this picture so probably couldn't leave the power mechanisms and sit low enough?
