Divorced NP435 Main Shaft

[slvr98svt]

Hey guys, I just registered here because I bought a divorced NP435. Well turns out I need a married, so I have a main or output shaft if you will, with the tail housing and yoke. I am looking to trade someone for a married shaft if at all possible. If not I will sell for say $100. I know that the NP435 is a usual swap for the EB, so I figured I would throw this out there.
Thanks,
-Matt

 

[mustangtoby]

Do a little research, but you can still use this tranny. I believe you must change the output shaft to the proper 28 spline, and buy the correct adapter (should be trapazoidal on that tranny), then you should be set.

 

[bax]

Do a little research, but you can still use this tranny. I believe you must change the output shaft to the proper 28 spline, and buy the correct adapter (should be trapazoidal on that tranny), then you should be set.

I dont think he is wanting the 28 spline. By his description he should have the 28 spline. He is wanting a 31 spline to trade for his 28 spline. He knows he can swap out shafts.

 

[telcolineman]

And you can buy the 2wd output new from JBG for $100, They may have the 4x4 shaft as well