• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

DOOR HINGE help!!!!!

diggs00

Sr. Member
Joined
Jul 8, 2016
Messages
355
Ok took old stock hinges off and replaced with new stainless lift off hinges.

The door gets about 4-6 inches before the latch hits the striker when I get this obstruction on the bottom hinge. How do I get this hinge to clear?

The door is hitting the hinge at the area in the blue/purple in the image below.

https://drive.google.com/file/d/1RMF...ew?usp=sharing
 

powers4680

Full Member
Joined
Jun 2, 2010
Messages
326
Duff 4x4 on YouTube has great instructions on the lift off hinges.


Sent from my iPhone using Tapatalk
 

jmangi62

Bronco Guru
Joined
Jul 28, 2013
Messages
2,512
I sold my lift off hinges cuz I just couldn't get the doors right.;)
 

Tiko433

Contributor
I know just enough to be dangerous
Joined
Jul 9, 2014
Messages
1,898
Loc.
Bolivia, North Carolina
I’m doing the Diff hinges, I like how they put the pin side of the hinge on the door So the hole side of the hinge I used a 1/2 All Thread rod and lined it up. When that lined up I hung the door and worked on alignment. Honestly I think I got lucky. I may give the other door a shot tomorrow
 
Top