KS Door panels, heat shield, steering wheel etc

[Spartan]

Have some various parts that need new homes, all prices are or best offer and the ride is not included.
Thanks
Tan door panels, never mounted after new upholstery, on steel panels, uncut both panels have a nick on the back corners, but pretty hard to see. $100

Old Grant wood steering wheel complete with horn button and adapter kit, needs redone $10 SOLD

9" Air cleaner, for 2bbl, chrome orig, now rusty $free pay shipping and its yours.

Stock exhaust heat shield or noise reducer? (goes on passenger side and bolts to the frame above the muffler, goes between the floor pan and muffler) make an offer, not sure what to ask ?$ ?

 

[Spartan]

Heat/noise shield
Spare carrier complete with mounting brackets, release cable and cable bracket, tailgate latch, pretty good shape, a bolt is broken off in one of the mounting brackets and the release cable is separating at the bracket on the bumper mount $100?

If I'm priced to high just give me a holler, asking prices are OBO, I'm easy, so don't be shy.
If you need any other pics, just let me know.
Thanks

 

[Spartan]

Spare carrier also includes the tailgate latch for the carrier.

 

[redpony]

Hi, What does the heat shield fit or go to? Thanks, Nice door panels shipping to 94572.

 

[Spartan]

Ill check shipping tomm for ya on the door panels.
The heat shield was bolted to the frame of my 77 EB, down the passenger side, right about under the passenger front bucket and ran down to right about the rear bench seat, just under the floor pan, and the orig exhaust was running just below this shield.
I'm not quite sure if it was there to reduce heat to the floor pan or reduce the noise/drone of the the exhaust, maybe both (?)
It's fairly long and fairly thick metal (not pot metal) it has surface rust, but no rust holes. I'm guessing right at 3ft (?) long.

 

[BrakeFadePhoto]

That steering wheel is calling my name. Mind shipping to Ca?

 

[Spartan]

How's $20 to your door on the steering wheel and adapter kit?

Looks like shipping door panels will be about $30 to ship, anything over that and ill eat it.

 

[Spartan]

Okay guys, got some interest in a few things.
SOLD grant wheel and adapter.

I also have a rear driveshaft it's a Spicer unit, all u-joints look good and tight, compressed its 32" (middle of u-joint-middle of u-joint) and its 37" extended (middle of u-joint-middle of u-joint)
I think I paid Bill (WildBill) $60 for it,(?) so I'd like to get $60 back out of it, plus the ride. (Likely pricey on shipping but I can't use it,(I need one longer) if someone here can, ill ship it.

Have an Edelbrock 1406 600cfm 4bbl carb with electric choke.
It needs a kit.
I also have 2 Edelbrock calibration/tuning kits with jets, rods etc that ill include with it as well as a partial rebuild kit.
$100 for all of it

Have a couple parchment armrests, passenger side is pretty good, slight tear, but the drivers side is pretty much shot, don't know if its repairable, you be the judge guys.
This is one of those;
Buy the passenger armrest and get the drivers side armrest free lol
How's $20 (?)

 

[Spartan]

Eddy 600cfm 4bbl carb, small kit, 2x tuning/calibration kits $100 + ride

Spicer rear driveshaft 32"-37" $60 +ride

Spare carrier, cable release, cable bracket, mounting plates, tailgate latch $75 +ride

Tan re-upholstered door panels x2 $100 + ride

Parchment armrests x2, drivers side rough, passenger side is decent $10 +ride

Heat/noise (?) shield, surface rust only, no rust holes, mounting tabs are on it, $ make offer?

9" 2bbl Air Cleaner, lid and base, was chrome now has surface
rust $0, free, pay the ride and its yours!

Nice pair of rear red reflectors x2, no cracks or visible damage, very bright! The flash from my camera lit it up, little dab of overspray on one, but comes off easy.
$10+ ride

Make offers on any of it guys, it all needs to go, I'm easy.
Thanks

 

[Spartan]

Eddy 600cfm 4bbl carb, small kit, 2x tuning/calibration kits $100 shipped

Spicer rear driveshaft 32"-37" $60 +ride

Spare carrier, cable release, cable bracket, mounting plates, tailgate latch $60+ride

Tan re-upholstered door panels x2 $125 shipped

Parchment armrests x2, drivers side rough, passenger side is decent $10 shipped

Heat/noise (?) shield, surface rust only, no rust holes, mounting tabs are on it, $ make offer?

9" 2bbl Air Cleaner, lid and base, was chrome now has surface rust $0, free, pay the ride and its yours!

Nice pair of rear red reflectors x2, no cracks or visible damage, very bright! The flash from my camera lit it up, little dab of overspray on one, but comes off easy.
$10 shipped

Updated prices

Brand new in box;
Comp Cams 281HR, Retrofit hydraulic roller cam.
It's to much cam for my plans, might trade for a more mild grind.
$100+ride

Parchment rear bench seat armrest x2, pretty good shape, no real wear or tear, but they are original so they have spots if discoloration, may clean up (?)
Only issue I can see is the padding is pulling away slightly from the metal "frame"
$40+ ride

 

[Spartan]

Eddy 600cfm 4bbl carb, small kit, 2x tuning/calibration kits $100 shipped for everything.

Spicer rear driveshaft 32"-37" $60 +ride

Spare carrier, cable release, cable bracket, mounting plates, tailgate latch- $75 shipped

Tan re-upholstered (pair) door panels-$110 shipped

Parchment armrests (pair) drivers side rough, passenger side is decent $0 FREE

Heat/noise (?) shield, surface rust only, no rust holes, mounting tabs are on it, $ make offer?

9" 2bbl Air Cleaner, lid and base, was chrome now has surface rust $0, FREE, pay the ride and its yours!

Nice pair of rear red reflectors x2, no cracks or visible damage, very bright! The flash from my camera lit it up, little dab of overspray on one, but comes off easy.
$0 FREE

Brand new in box;
Comp Cams 281HR, Retrofit hydraulic roller cam.
It's to much cam for my plans, might trade for a more mild grind.
$100 shipped

Parchment rear bench seat armrest (pair) pretty good shape, no real wear or tear, but they are original so they have spots if discoloration, may clean up (?)
Only issue I can see is the padding is pulling away slightly from the metal "frame"
$40 shipped

Anyone need???