Extended wheelbase

[av8rds]

I'm looking for pics and tech input from anyone who has/has seen a bronco with the Front extended at or past the grill area. A picture posted the other night got me thinking so I figured I'd see whats out there.

Would prefer they not be full tube buggies as thats not where I'd be starting but I'll take what I can get!


examples are:

Matt' and Shannons. But Shannon doesnt have any bodywork to give me any ideas for my idea/plan/musing's.

 

[Madgyver]

The bronco in this pic would have the radiator right above the front diff.
I'd like to see more pics of it. From the front angle.

 

[av8rds]

The bronco in this pic would have the radiator right above the front diff.
I'd like to see more pics of it. From the front angle.

I added it to the first post.

 

[Madgyver]

Thanks,
any details on the set-up?

 

[av8rds]

Thanks,
any details on the set-up?

No, he said it was 3 trucks ago and really didnt remember! ;D Wish I had that problem!

 

[Socal Tom]

http://broncoholics.com/support/topic.asp?TOPIC_ID=1263
its a couple of years old but he pushed the axle forward about 4 inches I think. its a good write up so you can understand whatsninvolved.
Tom

 

[av8rds]

http://broncoholics.com/support/topic.asp?TOPIC_ID=1263
its a couple of years old but he pushed the axle forward about 4 inches I think. its a good write up so you can understand whats involved.
Tom

yeah I'm more curious in the body work involved in doing a 10-12 inch stretch and still have a recognizable front end than the suspension end of it.

 

[Socal Tom]

yeah I'm more curious in the body work involved in doing a 10-12 inch stretch and still have a recognizable front end than the suspension end of it.

i guess you are planning full hydro steering then.

 

[av8rds]

i guess you are planning full hydro steering then.

I'm between that and running a forward facing F150 box

 

[av8rds]

bump for more pictures

 

[av8rds]

another one I found, no note of how much front stretch but the body work is what I was looking at anyway

 

[KyleQ]

I went forward around 6" and trimmed the grill. I looked real mean with 39.5 boggers on it

 

[av8rds]

do you have a full side picture?

thanks

I went forward around 6" and trimmed the grill. I looked real mean with 39.5 boggers on it

 

[TBS-POPS]

Look at the thread I posted 3/10/10 "Going Green" that Bronco is at 104"wb and takes a real good look to notice it's not stock.

 

[av8rds]

Look at the thread I posted 3/10/10 "Going Green" that Bronco is at 104"wb and takes a real good look to notice it's not stock.

Nice truck but I'm looking to go into the grill and am looking for pictures of it being done and still keeping a reasonably 'normal' bronco look, like above

 

[av8rds]

more like this. Love to see what he did with the grill/fender area


edit: just realized thats Coby's. Guess we are going to have to wait to see the front end bodywork!

 

[KyleQ]

4.11 gears and still over 100:1 in low range I use torque!

 

[KyleQ]

do you have a full side picture?

thanks

I'm washing it here, got it jacked up all funny, but you get the idea.



I'm almost certain the 39.5's stuck out or were nearly flush with the front.