Green_Bastard
Full Member
- Joined
- Jan 4, 2014
- Messages
- 257
My wife is pushing me to clean out the garage so I need to get rid of a few things. I can provide pics upon request.
Full width 1977 high pinion dana 44 axle housing with weld on wedges and thick wall tubes. The old wedges have been removed. New Wild Horses wedges included and ready to weld on.
Full width high pinion dana 44 axle housing from a 78 Bronco
original manual shift steering column
99 Explorer EFI harness with computer and firewall harness (does not include the 4r70W harness or the inertia switch) - SOLD
Mass air EFI harness from a 90 Mustang - SOLD
90 Mustang 5.0 upper and lower intake with injectors and fuel rail
Tbird 5.0 upper and lower intake
Stock radius arms from a 72, caps included. A little rusty but in decent shape
Stock radius arms from a 78. One is missing the shock mount bracket. These include the caps with the
tab to add a front shock
New radius arm brackets to add dual shocks at the factory location
New radius arm bushings
Factory track bar
Front drum brake assembly, everything from the knuckles out. One drum is damaged
BCB frame reinforcement plate for a PS box (this is the plate only)
Full width 1977 high pinion dana 44 axle housing with weld on wedges and thick wall tubes. The old wedges have been removed. New Wild Horses wedges included and ready to weld on.
Full width high pinion dana 44 axle housing from a 78 Bronco
original manual shift steering column
99 Explorer EFI harness with computer and firewall harness (does not include the 4r70W harness or the inertia switch) - SOLD
Mass air EFI harness from a 90 Mustang - SOLD
90 Mustang 5.0 upper and lower intake with injectors and fuel rail
Tbird 5.0 upper and lower intake
Stock radius arms from a 72, caps included. A little rusty but in decent shape
Stock radius arms from a 78. One is missing the shock mount bracket. These include the caps with the
tab to add a front shock
New radius arm brackets to add dual shocks at the factory location
New radius arm bushings
Factory track bar
Front drum brake assembly, everything from the knuckles out. One drum is damaged
BCB frame reinforcement plate for a PS box (this is the plate only)
Last edited:
