• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Extra Parts

Jeep Slayer

Bronco Guru
Joined
Jan 14, 2002
Messages
1,353
Loc.
Wildomar California
Ok so I got the rebuild done on mt little 1 bbl carb and after realizeing that the PVC had to be hooked up it seemed to tune right in, I think I still have some small ajustments to make but need to change the plugs frist. I was proud of my self as I know jack about carb's and she started right up . But I had my doubts becouse after the rebuild I had a shoot load of extra parts, all I can say is I have a bear bones carb set up.
now to see if it stoped the driping that was fouling out my two center plugs 8)
 

carnage351

Jr. Member
Joined
Nov 14, 2002
Messages
71
Loc.
Albuquerque, NM
Most of the Carb kits that I have used have tons of left over parts. They do that so that one kit will work with many different carbs. I wouldn't worry too much about it as long as the carb seems to be running good.
 
Top