• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Finally got my bronco design dash painted and installed:)

Burkulater

Jr. Member
Joined
Mar 30, 2011
Messages
316
Loc.
Lancaster, PA
image.jpg

Lots of work but well worth it
 

blamejane

Contributor
Bronco Guru
Joined
May 12, 2012
Messages
1,975
Looks gorgeous. Well worth the work from the looks of it. Congrats on getting it done, and an excellent job at that!
 
OP
OP
B

Burkulater

Jr. Member
Joined
Mar 30, 2011
Messages
316
Loc.
Lancaster, PA
That looks slick, good job!

Thanks I put some thought into it, I love where I put my switches but the cigarette lighter really didn't want to be there...... Wire too short/ in the way of the defroster duct etc.. But that's where I wanted it so I made it work. Had to cut down some stems to get all the knobs the same distance off the dash. Not to mention the thread I started with everything that needed modified on the back side of the dash to make it fit.....
 
Top