treihesse
Bronco Guru
- Joined
- Aug 1, 2008
- Messages
- 1,459
I have a front and rear driveshaft from WH these are level 1
Front has a running length of 23.5 has been rebuilt has a few scratchs from rock otherwise perfect .
Rear has been rebuilt has a running length of 34.5( mis measure on photo)
These were sold to me as a shaft for a 4.5-5.5" lift these are 1.5" shorter than the ones on my truck . These has a running length for a 3.5" lift
I would run these if they would fit but they Will not even work for trail spares
These were made by boyds driveline of stockton
315+ sh
Trei 720-936-0791
t
Front has a running length of 23.5 has been rebuilt has a few scratchs from rock otherwise perfect .
Rear has been rebuilt has a running length of 34.5( mis measure on photo)
These were sold to me as a shaft for a 4.5-5.5" lift these are 1.5" shorter than the ones on my truck . These has a running length for a 3.5" lift
I would run these if they would fit but they Will not even work for trail spares
These were made by boyds driveline of stockton
315+ sh
Trei 720-936-0791
![20130331_191554_zps2f9a17a1.jpg](http://i1357.photobucket.com/albums/q754/75treibronco/20130331_191554_zps2f9a17a1.jpg)
![20130331_191638_zps559da61d.jpg](http://i1357.photobucket.com/albums/q754/75treibronco/20130331_191638_zps559da61d.jpg)
![20130331_191605_zpsfc69a976.jpg](http://i1357.photobucket.com/albums/q754/75treibronco/20130331_191605_zpsfc69a976.jpg)
![20130331_191841_zps2aa600e3.jpg](http://i1357.photobucket.com/albums/q754/75treibronco/20130331_191841_zps2aa600e3.jpg)
![20130331_191740_zpsed14ed44.jpg](http://i1357.photobucket.com/albums/q754/75treibronco/20130331_191740_zpsed14ed44.jpg)
Last edited: