Front Seat and Belt Bolt Questions

[clintonvillian]

Where did the original belts mount to? I'm assuming this is not factory?

Where does this latch go? Again is this a stock piece?

 

[Jebus]

My original seat belt holes are inline lateraly with the cab mount and bulkhead bolts.

That passenger seat latch hit's a footmans loop to latch.

 

[clintonvillian]

Is it just screwed to the floor?

 

[Jebus]

I had a bench seat, so I'm not sure, but I think the passenger seat flipped forward w/buckets. Are you missing parts? Someone else will chime in with the correct info.

 

[thegreatjustino]

What year is your Bronco? The footman loop was added around 70/71. If yours is earlier than 70, you've got a set of later seats in an earlier Bronco. There will not be the correct holes in the floor to mount the footman loop. Seat belt photo appears to be a stock install for the earlier years to me.

 

[clintonvillian]

It is a 1971.

So do both belts attach to the same bolt?

 

[AC932]

Not sure if its correct or not, but here's where the belts attach on my 74

(Excuse the mess, normally there's a center console covering it up)

 

[Steve83]

Look UNDER the floor. The seat belt mounting points will have LARGE square welded nuts.

 

[Rustytruck]

threaded 7/16ths-20. industry standard for most cars and trucks out there.

 

[thegreatjustino]

So do both belts attach to the same bolt?

Both belts do not attach to the same bolt.