Just got a GM saginaw conversion kit from Toms bronco today, it came with a pump, bracket and belt and no instructions on plumbing it. My 75 had 2 hoses to it and a fluid cooler, the saginaw has two fittings one compression and one I am not sure of. Any advice on running the hoses and do I still run through the cooler? Thanks.
Community
Message Forum
Photo Gallery
Event Calendar
Book Reviews
Bronco Wallpaper
Bronco FAQ
Link Back to CB!
Photo Gallery
Event Calendar
Book Reviews
Bronco Wallpaper
Bronco FAQ
Link Back to CB!
Buy / Sell
Bronco Tech
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
-
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!If you have problems registering or can't log into your account, please contact Admin.
GM saginaw conversion
- Thread starter cantrem
- Start date
You have one return (low pressure) the push on one and one high pressure. You may need an adapter for the high pressure. For the low you can run it through the cooler just get some bulk hose at your local auto parts store.
