• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Good Metal Shop in the Richmond VA area?

avijay

Jr. Member
Joined
Dec 31, 2007
Messages
84
Does anyone know of a good body/metal shop in or around the Richmond VA area that does good work?? Need to get some rust spots taken care of.
 
OP
OP
avijay

avijay

Jr. Member
Joined
Dec 31, 2007
Messages
84
Im interested as well. I'm in glen allen and starting on a pretty rough '72.

Broncodriver99

I'm also in Glen Allen as well, I live right off of Nuckols Road. Hopefully someone will chime in with a good body shop around here to go to.
 

AGShelby

Full Member
Joined
Dec 5, 2006
Messages
510
Loc.
San Antonio, Texas
Broncodriver99

I'm also in Glen Allen as well, I live right off of Nuckols Road. Hopefully someone will chime in with a good body shop around here to go to.

Try Jack Sharp out in Mineral. He works with Joe at Mustang Bills - and does excellent metal work. I had him do the cowl repair on my '66 shelby clone - his welds were all clean, butt welded and properly prepped/sealed.

I don't have his number anymore - but try reaching him through Joe (540) 894-8111.

Good luck getting a hold of Joe.....

Might be better to run out to Joe's shop in Mineral, and walk around to Jack's in the back.
 

JAFO

Bronco Guru
Joined
Dec 3, 2007
Messages
1,556
Loc.
Beaverdam
Hey, some of us are neighbors. I'm located near Richmond VA. Actaully work in the west end.
 
Top