Great start on a frame up project with many parts

[chalmers45]

For Sale/ 66-77 early bronco. I have a great start on a early bronco, then life happened and now I have a family and I have decided to give up on my project. I started 5 years ago with a frame that I sanded down, primed and painted. So far I have a new wildhorse suspension including new leaf springs, dual shocks all the way around and all the new components, new stainless brake lines, e brake cable, new poly bushings, new wildhorse drop brackets, new radius arm inserts, new body mount rubber, the front and rear axles have new bearings, new drums, new brake kits minus the cables inside that I should have replaced. The engine is a 351w with 4 bolt mains that has been bored over and hot tanked. The bottom end has a new engine kit, the crank turned the heads resurfaced. The intake is a Edelbrok performer that matches the cam. I never bought a carb. The engine is bolted to a one piece bell housing c6 transmission ( hard for me to find ). I replaced the trans filter and never found any steel. Inside the bell housing is a new b@m torque converter. I have the origanal transfer case and also a new process that came out of a later model bronco. I never did buy the adapter that would go between the c6 and the origanal transfercase. The front end is complete I left the worm gear box on hoping to one day have power steering. The front axles have new Warn lockouts. All that I just listed is already on the frame. Off the frame I have a complete front axle for a 79 bronco that had disc brakes (not all the brake components are there) and another 9" rear axle (not all the brake components are on this either). I also have a steering column, pedals with the frame, door window components, a new B@M shifter, a 4 point roll bar, a 289 that I know nothing about, one or two radius arms besides the ones that are already on it, a dash panel with the speedometer and other gauges (not sure if they work), knobs, head light rings, tail light covers, and many more odds and ends that I cant remember off the top of my head. Ideally I would like to sell it all complete. I would really like to keep everything together thats allready on the frame, but I am open to all options. I hope this is of interest to some of you. Feel free to contact me via email with any questions that you may have. Take care.