How does wiring harness attach to frame and body?

[JAFO]

I tried searching some, but can't stumble onto an answer.

I removed the old wiring harness like seven years ago. So, now I have a Centech harness and am ready to do the install. How do I attach the harness to the frame? For that matter, how is the factory harness attached to various points on the body and frame?
Thanks for any help.

 

[langester]

There are clips along the frame. If they are missing you will have to source some new ones.

 

[Crush]

Inuse industrial cush clamps and self tapping/drilling bolts

 

[langester]

My frame had metal rings that were crimped into holes along the frame. There were plastic ones for the fuel line and brake line I was able to reuse, the ones for the harness I have to replace as well. I was going to use rubber coated metal rings and bolt them to the frame with self tapping screws.
Good luck!

 

[JAFO]

Thanks! I was figuring most anything goes as long as it is secure. I am aiming for a factory look. I'll Google for some pics.

 

[Quick & Dirty]

The technical name is "adel clamp".

If you want to get really technical, "MS21919 aircraft clamp".