Hydroboost return line fitting

[pcf_mark]

I thought this would be an easy search and done but no luck. I broke the return line off on my Astrovan hydroboost when I overtightened it trying to solve a leak.

It looks special because it has an o-ring and an internal orifice in it. Anyone know where I can get one? I was using a basic straight fitting and a rubber hose. Lots of threads on the pressure lines.

Thanks

 

[toddz69]

Best bet is to go grab another one at the junkyard.

Todd Z.

 

[bronc50]

You can get the fitting you need at any -AN fitting shop.

 

[pcf_mark]

Does this fitting need the orifice? If I go to a hydraulic shop it probably won't have that. Just not sure what it does.

 

[bronc50]

They have the fitting in a -AN style with the exact same flare o ring etc.

 

[toddz69]

They have the fitting in a -AN style with the exact same flare o ring etc.

Hydratech sells the o-ring fitting with the -6 AN end on it (HBS9101 on this page).

http://www.hydratechbraking.com/hose_fittings.html

Never seen it anywhere else.

Todd Z.