• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

In need of dimensions for location of fuel selector valve

mhinchliffe

Jr. Member
Joined
Dec 21, 2018
Messages
108
Like it says, need to know approximate placement of fuel selector valve on a 73 model.
Reference would be from edge of raised floor and from floorpan.
Thx in advance
 

No Hay

Bronco Guru
Joined
Jun 4, 2014
Messages
1,657
Don't know if my '76 is the same as '73, but with carpet and the metal trim strip, it's 1 1/2" off the floor and 15 3/4" from the far edge of the carpet trim strip to center screw on the handle.
 

Rightpace

Jr. Member
Joined
Aug 26, 2019
Messages
114
16 1/4" from doorside edge of seat platform panel
2 1/2" down from seat platform panel.
This is center of switching handle measurement.
 

savage

Contributor
Bronco Nut
Joined
Apr 18, 2007
Messages
2,482
Loc.
Renton
My 74 is 16 1/2 inch from out side edge to center of lever , and 2 1/2 inch from top edge of floor to center of lever. It looks like it may be different from one bronco to another.
 

Attachments

  • DSCN2326.jpg
    DSCN2326.jpg
    161.8 KB · Views: 23
OP
OP
M

mhinchliffe

Jr. Member
Joined
Dec 21, 2018
Messages
108
Got it kids! Thx so much. Let's take it for a drive tomorrow.
 

Attachments

  • aMRbB%fRRd+4aYGN9GZo9w.jpg
    aMRbB%fRRd+4aYGN9GZo9w.jpg
    99.3 KB · Views: 14
  • aNAUDQBVRkasAC4sPv9hxQ.jpg
    aNAUDQBVRkasAC4sPv9hxQ.jpg
    91.7 KB · Views: 13
Top