We love classic Ford Broncos and have been fortunate enough to be involved in several builds over the past few years. As the shop that provided all of the wiring and tech for the builds, when it came to installing audio, it was always a huge challenge. The customer wanted good sound but didn’t want to cut into their new upholstery kit. Luckily we had some great customers that gave us the freedom to try out ideas on their Broncos, and from that the TPD HiFi Bronco Audio kit was born.
We started with designing a kick panel that fit with the stock parking brake, didn’t cut into the kick panel sheet metal and most importantly, sounded awesome. Mission accomplished.
https://tpdhifi.com/products/66-77-bronco-speaker-kick-panels
Since our kick panel kit is designed around the patented Morel Carbon Nano speakers that need a powerful and clean signal, we added a Musway D1S amplifier/DSP combo that is small enough to fit under the dash, keeping the electronics off the floor of the Bronco and out of the elements. We also designed a custom bracket to make under dash mounting simple.
Finally on to the subwoofer to fill out the sound with the low frequencies. We use the Musway SW-A7 Powered 7 inch subwoofer with a custom bracket that mounts under the passenger seat simply by unbolting the front right corner bolts and slipping the sub bracket under the seat and tightening back down.
Finish the install with our custom wiring harness that comes with EVERYTHING you need to finish the installation, event the fuses and grommets! Then take off the top and crank up the tunes in your classic Bronco.
Gen 1 Full Audio Kit:
https://tpdhifi.com/products/1966-1977-bronco-kick-panels-morel-virtus-nano-carbon-full-kit
Call or Text us (918)992-6292 if you have any questions
Made in USA | Broken Arrow, Oklahoma
We started with designing a kick panel that fit with the stock parking brake, didn’t cut into the kick panel sheet metal and most importantly, sounded awesome. Mission accomplished.
https://tpdhifi.com/products/66-77-bronco-speaker-kick-panels
Since our kick panel kit is designed around the patented Morel Carbon Nano speakers that need a powerful and clean signal, we added a Musway D1S amplifier/DSP combo that is small enough to fit under the dash, keeping the electronics off the floor of the Bronco and out of the elements. We also designed a custom bracket to make under dash mounting simple.
Finally on to the subwoofer to fill out the sound with the low frequencies. We use the Musway SW-A7 Powered 7 inch subwoofer with a custom bracket that mounts under the passenger seat simply by unbolting the front right corner bolts and slipping the sub bracket under the seat and tightening back down.
Finish the install with our custom wiring harness that comes with EVERYTHING you need to finish the installation, event the fuses and grommets! Then take off the top and crank up the tunes in your classic Bronco.
Gen 1 Full Audio Kit:
https://tpdhifi.com/products/1966-1977-bronco-kick-panels-morel-virtus-nano-carbon-full-kit
Call or Text us (918)992-6292 if you have any questions
Made in USA | Broken Arrow, Oklahoma
Attachments
-
6473 Bronco Black-Side.jpg126.5 KB · Views: 47
-
Wires.jpg153 KB · Views: 46
-
MUSWAYSW-A7.jpg188.7 KB · Views: 38
-
MUSWAY_D1S.jpg59.6 KB · Views: 45
-
6473 Bronco Black+Kit.jpg184 KB · Views: 42
-
6677 Bronco Driver Back_.jpg128.9 KB · Views: 45
-
6473 Bronco Passenger Black.jpg137.7 KB · Views: 37
-
6473 Bronco Driver Black.jpg207.3 KB · Views: 38
Last edited: