FL Kayline Soft Top Parts - really need help here!

[acmefl]

Kayline Soft Top Parts.

Bought a used Kayline soft-top and a few parts were missing. Need some help finding these cause I’m stuck without them.

Item #25 in the Kayline Instructions.
It is the channel that the sewn in rope on the leading edge of the top slides into. Then this channel slips into the riser. (Again, I’m looking for the channel, if I confused anyone other than me).

Item(s)#18 – one left and one right
Called the horizontal rod bracket. These screw onto the top of the windshield frame to help hold the top above the window. Need left and right

This is the link to the instructions if anyone thinks they may have any of this stuff:
http://www.thejeep.com/kayline/instsheets/331210.pdf

Thanks for looking at such a long post but I’m really dead in the water without these parts.

Thx
Aaron

 

[gpete]

Kayline Soft Top Parts.

Bought a used Kayline soft-top and a few parts were missing. Need some help finding these cause I’m stuck without them.

Item #25 in the Kayline Instructions.
It is the channel that the sewn in rope on the leading edge of the top slides into. Then this channel slips into the riser. (Again, I’m looking for the channel, if I confused anyone other than me).

Item(s)#18 – one left and one right
Called the horizontal rod bracket. These screw onto the top of the windshield frame to help hold the top above the window. Need left and right

This is the link to the instructions if anyone thinks they may have any of this stuff:
http://www.thejeep.com/kayline/instsheets/331210.pdf

Thanks for looking at such a long post but I’m really dead in the water without these parts.

Thx
Aaron

I have a used Kayline top with complete hardware

 

[Sporto]

That riser may be available at Tom's Bronco Parts as part of the complete bikini top kit.

http://www.tomsbroncoparts.com/product/bikini-kit-black-wmounting-hardware-66-77-ford-bronco-new

This would give you part 25 at least. Part #18 would be easy to fab. There are a lot of talented members on here if you cannot do so, I have them as part of my top hardware, if someone needed measurements, I could draw something up.

Good luck!

Rich

 

[mdshore]

i have a decent used kayline top and support bows im thinking of selling, i understand rampage parts will fit what im missing ..