Looking for (4x4) C4 tranny

[73bronc92]

Hey Im looking for a C4 with a short 28 spline output shaft with 164 tooth bell housing. This is for a 351 clev. with a 3 speed on the floor. If you have any conversion parts for it too let me know. Thanks

 

[StnePny]

I do not know if the 302 bellhousing will fit a 351c, I have a (Used) C-4 with Adapter, Dipstick & Tube, Torque Converter, Flywheel & Kickdown Rod - $800.

Charles

 

[StnePny]

I do not remember if the 302 bellhouseing will fit a 351c. I have a (Used) C-4 with Adapter, Dipstick & Tube, Torque Converter, Flywheel & Kickdown Rod - $800.

Charles
310-450-4163

 

[Pedestrian]

Pm'd you.