• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

looking for bilstien shock info and part #

bronco barnes

New Member
Joined
Nov 29, 2005
Messages
34
Loc.
fullerton
I have a 69 bronco 3.5" deaver coils & leafs. NO body lift. got my old front shock mounts off (easy..). bought the f-250 mounts,have not welded them in yet. looking to spend about 400.00 on shocks. just need the correct size & valving, part #s. guaraged many years need to drive it.... will be used 60% time on desert trailes. hopfully someone has the same setup..
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
for the front, 12" short body 7100 remote reservoir with 360/80 valving.

for the rear, i've seen people run 12" 5125's, or you can run 7100's in a shrader or a remote reservoir. proper valving is 255/70 valving.
 
OP
OP
B

bronco barnes

New Member
Joined
Nov 29, 2005
Messages
34
Loc.
fullerton
Thanks guys. would the 360/80 valving be the same for 12"5125 front shock? Also any idea of price for the 7100s & best place to purchase.
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
5125 shocks come with 255/70 valving. call lee at raceshock.com and tell him you're a member here, he offers us a 10% discount. might also see if he has any rebuilt 7100's. i got my rebuilt 7100 shraeders for $83 a piece.
 

HotWheels

Bronco Guru
Joined
Jul 8, 2003
Messages
9,179
Loc.
Twilight Zone
I've got some really nice 5150s that I'm willing to part with. I had them on when I had my lift. They are too long now. I've got 6 (4 for front 2 for rear).
 
OP
OP
B

bronco barnes

New Member
Joined
Nov 29, 2005
Messages
34
Loc.
fullerton
Hotwheels, are you willing to part with only 4 shocks? if so what valving? and how did you like the ride? 73stallion thanks for the conection I will give lee a call if this dont work out. thanks again.
 

HotWheels

Bronco Guru
Joined
Jul 8, 2003
Messages
9,179
Loc.
Twilight Zone
All eye/eye. (4) F4-BF5-A196HO 10" in the 255/70 valving and (2) F4-BF5-A196HO 10" in the 157/60. I ran the 255/70 at each corner and ran the 157/60 in front of the front axle. This gave me great road and off-road handling.

Lee N. Helped me set this shock setup which has worked well. They are just a little long for my lowered bronco now.
 
OP
OP
B

bronco barnes

New Member
Joined
Nov 29, 2005
Messages
34
Loc.
fullerton
Go figure..I just cut off the old dbl. shock and stock setup to go back to singels last week, so dont need 6 shocks. How low did you go on the bronco? I have a set of stock 9000 ranchos cheap. Hotwheels, Really appricate the feedback. I will give Lee a call.
 
Top