Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
I Am Looking To Build Another 302. I Was Told By The Guy At The Performance Shope That 82 Or 83 And Up Mustangs Came With Full Roller Motors. Anybody Have Any Knowledge Of This?
85 and later had the roller cams in the Mustangs. Lincolns Mark 5's also had the roller motor. 85's had slightly better heads than the later ones. '86-'89 had forged pistons and '88 (California only)-93" were Mass Air
Get one out of a <1997.5 explorer/mountaineer and you will get GT40P heads (requires some header fab or FMS shorty headers) and a cool aluminum oil pan! ... plus if you get it complete, you can sell the EFI upper/lower and keep the serp setup!