Looking for dual wiper/coolant reservoir

[Smedley]

I am looking for a dual reservoir for the wiper fluid and coolant overflow. I am running the Fitech FCC2 in front of driver side wheel well so that location is not an option. I know one of the vendors has one for that spot. I'd like to place it on top of passenger side wheel well. I thought I remember seeing a pic of one, but have not been able to find one.

I found the one below for late 90's early 2000's ranger and explorers. Any one using it? It looks like it would fit well.

Thoughts?

 

[SteveL]

That's a nice looking set up. Gonna have to watch this one.

 

[langester]

Funny, I was at the scrap yard this morning scrounging around and saw that tank set up in a Bronco II. I had the same thought, looks like it would work but I didn't measure anything. Keep us posted when you get yours figured out.

 

[bseager]

Denis carpenter makes one. You can find it on Amazon.

Part number
E7TZ-17618-B

Sent from my SM-G892A using Tapatalk

 

[Smedley]

This one mounts on driver side wheel well. I like it, but it won't work for me. Thanks.

Denis carpenter makes one. You can find it on Amazon.

Part number
E7TZ-17618-B

Sent from my SM-G892A using Tapatalk

 

[SteveL]

Just looked on Amazon. That exact explorer dual overflow is there but they're $72.

 

[langester]

If anyone is interested in one of these I can run down to the scrap yard and pluck one. I bet I can get it for next to nothing. Let me know if you want one, I am going down there tomorrow morning anyways to scrounge around again.

 

[Smedley]

If anyone is interested in one of these I can run down to the scrap yard and pluck one. I bet I can get it for next to nothing. Let me know if you want one, I am going down there tomorrow morning anyways to scrounge around again.

Can you measure to see if it will fit on the pside wheel well with hood closed?

 

[Smedley]

Just looked on Amazon. That exact explorer dual overflow is there but they're $72.

If you dig a bit you can find them for half that. I found one with the wiper fluid motor in it for like $45.

 

[langester]

Can you measure to see if it will fit on the pside wheel well with hood closed?

I can do that. I will swing by my Bronco in the morning and see if it fits. I will get the year off of that Bronco II as well so we have a reference where it came from.

 

[Smedley]

I can do that. I will swing by my Bronco in the morning and see if it fits. I will get the year off of that Bronco II as well so we have a reference where it came from.

Thanks. If it is much taller than 6-6.5", it will probably be to tall.

 

[langester]

10-4! I will update when I find out for sure.

 

[SteveL]

Keep in mind clearance for hood shocks if you run em.

 

[ChrisC74]

This one mounts on driver side wheel well. I like it, but it won't work for me. Thanks.

I run this one with the FCC there. I can post a picture in the morning

Sent from my Pixel C using Tapatalk

 

[langester]

I can verify this wont fit. I paid a dollar for it so its a cheap research item. Here are a couple pics.

 

[langester]

Sorry the pics were sideways. I was on my phone at the shop. The tank setup came off of a 99 explorer. I thought it was a Bronco II because I looked at 2 of those as well. The Bronco II's had the tanks on the drivers side.

 

[Smedley]

Sorry the pics were sideways. I was on my phone at the shop. The tank setup came off of a 99 explorer. I thought it was a Bronco II because I looked at 2 of those as well. The Bronco II's had the tanks on the drivers side.

Thanks Brother. I'll keep looking. The pics on Amazon did not make it look that tall, but there was nothing to compare it to. Appreciate you checking.

Will

 

[Smedley]

I run this one with the FCC there. I can post a picture in the morning

Sent from my Pixel C using Tapatalk

Chris,

I run the FCC2 and it is horizonal. Pic attached. I wish I had thought this far ahead when I installed it.

 

[ChrisC74]

Chris,



I run the FCC2 and it is horizonal. Pic attached. I wish I had thought this far ahead when I installed it.

10.4. I did not realize you were running the FC2. I have the original FC. I don't know the dims on your unit. Can you pivot it here?

Sent from my SM-G960U using Tapatalk