Looking for some shortcuts to finish my project

[kdaug5]

I'm finally getting back to my ground up on my 72 resto. The drivetrain is already installed, I just have a lot of loose ends. I just brought this home from storage last week and looking to get on the road

I'm not lazy, I searched this site and others looking for answers but didn't get far. So I'm posting here hoping for some

1. I have a 1990 351w and using the ford fuel injection. I will be using the serpentine without the smog pump but will have everything else, alt, ps, ac. What belt can I use?

2. I have the 77 ps gear box and a 78 f100 tilt column. I need the lower shaft to connect. Where can I get this?

I have more questions coming but this will help me get the momentum going

Thanks for any help
Kenny

 

[Bigbird]

As far as the lower shaft, call Borgeson and tell them what you have. They should be able to help you out.

With the belt, mock everything up and measure it with a cloth tape measurer like in the pic.

 

[Bferrari]

Check out the following link regarding serpentine belts, it has some good information on routing and sizes. http://forums.corral.net/forums/5-0-5-8-engine-tech/1313910-5-0-belt-length-c-delete-no-smog.html