firehawk
Full Member
I am hoping not, but I might have to sell my 71 bronco. I hurt my back at work and it might be what enables me to keep my house.
It is in the process of being redone. I have almost finished all the metal work and then it needs a little filler then paint.
It has the original paint and all original body panels except for the drivers side door and fender, hood and grille. They were damaged from the previous owner off roading it. I have a new fender and a used door, hood and grille.
It has about 40,000 original miles and I had to replace the front floor boards, drivers side kick panel and side apron. The frame is solid and rustfree. EFI 302 (original motor) 3 speed with hydroboost brakes. It sits on 35" MTRs and has the stock spare tire carrier. I have a 20 gallon gas tank to go with it. Autometer Monster tach. I also have a 2 inch body lift still in the box and all new front steering parts in the box. 4 point roll bar. Soft top. Half Doors. Wheel flares new in box. Windshield gasket new in box. 2 sets of PIAA off road lights. Tuffy Lock Box. 3G Alternator. Disc front brakes. And a bunch of other misc. stuff.
Power steering (installed)
Disc Front Brakes (installed)
Hydroboost brakes (installed)
3G Alternator (installed)
20 Gallon Gas tank (not installed)
Autometer Monster tach. (installed)
Autometer oil pressure, water temp gauges (not installed)
All new steering parts (not installed)
2 in body lift (not installed)
I also have a second set of wheels and tires(35" also)
It will need front and rear bumpers, windshield, paint and bodywork, and reassembly.
I have about $7500 into it and would like to get as close to that as possible.
I know I will have to eat the time I have invested and probably some cash too. If you might be interested in taking over this project email me.
firecat7@comcast.net
For pics you can go to my gallery. I will have updated pics of the work I have done within the next couple days.
Located in S.E. Michigan, Clawson 48017
It is in the process of being redone. I have almost finished all the metal work and then it needs a little filler then paint.
It has the original paint and all original body panels except for the drivers side door and fender, hood and grille. They were damaged from the previous owner off roading it. I have a new fender and a used door, hood and grille.
It has about 40,000 original miles and I had to replace the front floor boards, drivers side kick panel and side apron. The frame is solid and rustfree. EFI 302 (original motor) 3 speed with hydroboost brakes. It sits on 35" MTRs and has the stock spare tire carrier. I have a 20 gallon gas tank to go with it. Autometer Monster tach. I also have a 2 inch body lift still in the box and all new front steering parts in the box. 4 point roll bar. Soft top. Half Doors. Wheel flares new in box. Windshield gasket new in box. 2 sets of PIAA off road lights. Tuffy Lock Box. 3G Alternator. Disc front brakes. And a bunch of other misc. stuff.
Power steering (installed)
Disc Front Brakes (installed)
Hydroboost brakes (installed)
3G Alternator (installed)
20 Gallon Gas tank (not installed)
Autometer Monster tach. (installed)
Autometer oil pressure, water temp gauges (not installed)
All new steering parts (not installed)
2 in body lift (not installed)
I also have a second set of wheels and tires(35" also)
It will need front and rear bumpers, windshield, paint and bodywork, and reassembly.
I have about $7500 into it and would like to get as close to that as possible.
I know I will have to eat the time I have invested and probably some cash too. If you might be interested in taking over this project email me.
firecat7@comcast.net
For pics you can go to my gallery. I will have updated pics of the work I have done within the next couple days.
Located in S.E. Michigan, Clawson 48017
Last edited:
