McLeod
Full Member
- Joined
- Jun 29, 2008
- Messages
- 296
Looking to move some misc. parts out of my garage.
PICK UP ONLY - not interested in shipping.
I'm located about 15 miles north of I-90
I might be open to trades of parts. Some things I need are bumpers, windshield, decent tailgate from a 67-72 fullsize
Below each item is a link to a picture of that item.
Rear seat frame (only):
http://www.geocities.com/kjonmcleod/Bronco_Parts001_480x360.jpg
Used power steering pumps - (i will sell pulleys and brackets separately):
http://www.geocities.com/kjonmcleod/Bronco_Parts002_480x360.jpg
http://www.geocities.com/kjonmcleod/Bronco_Parts003_480x360.jpg
6 cyl/ 3spd transfer case extension housing:
http://www.geocities.com/kjonmcleod/Bronco_Parts004_480x360.jpg
Drivers wing window out of '67:
http://www.geocities.com/kjonmcleod/Bronco_Parts005_480x360.jpg
Reman. 10" clutch, pressure plate and 157 tooth flywheel.
Fits some real early Broncos and probably most Ford cars (mustangs, torinos etc.). Flywheel has light to moderate surface rust but it was machined just before placed on a shelf for storage:
http://www.geocities.com/kjonmcleod/Bronco_Parts006_480x360.jpg
http://www.geocities.com/kjonmcleod/Bronco_Parts007_480x360.jpg
http://www.geocities.com/kjonmcleod/Bronco_Parts008_480x360.jpg
Dana 30 parts:
http://www.geocities.com/kjonmcleod/Bronco_Parts009_480x360.jpg
Hurst shifter mechanism (probably works but not positive):
http://www.geocities.com/kjonmcleod/Bronco_Parts010_480x360.jpg
Stock pitman arm and manual steering box (box good for core or parts only):
http://www.geocities.com/kjonmcleod/Bronco_Parts011_480x360.jpg
4 degree blue bushings (probably Duff):
http://www.geocities.com/kjonmcleod/Bronco_Parts012_480x360.jpg
Steering column (out of a 73????-manual steering-good for parts or rebuild):
http://www.geocities.com/kjonmcleod/Bronco_Parts014_480x360.jpg
PICK UP ONLY - not interested in shipping.
I'm located about 15 miles north of I-90
I might be open to trades of parts. Some things I need are bumpers, windshield, decent tailgate from a 67-72 fullsize
Below each item is a link to a picture of that item.
Rear seat frame (only):
http://www.geocities.com/kjonmcleod/Bronco_Parts001_480x360.jpg
Used power steering pumps - (i will sell pulleys and brackets separately):
http://www.geocities.com/kjonmcleod/Bronco_Parts002_480x360.jpg
http://www.geocities.com/kjonmcleod/Bronco_Parts003_480x360.jpg
6 cyl/ 3spd transfer case extension housing:
http://www.geocities.com/kjonmcleod/Bronco_Parts004_480x360.jpg
Drivers wing window out of '67:
http://www.geocities.com/kjonmcleod/Bronco_Parts005_480x360.jpg
Reman. 10" clutch, pressure plate and 157 tooth flywheel.
Fits some real early Broncos and probably most Ford cars (mustangs, torinos etc.). Flywheel has light to moderate surface rust but it was machined just before placed on a shelf for storage:
http://www.geocities.com/kjonmcleod/Bronco_Parts006_480x360.jpg
http://www.geocities.com/kjonmcleod/Bronco_Parts007_480x360.jpg
http://www.geocities.com/kjonmcleod/Bronco_Parts008_480x360.jpg
Dana 30 parts:
http://www.geocities.com/kjonmcleod/Bronco_Parts009_480x360.jpg
Hurst shifter mechanism (probably works but not positive):
http://www.geocities.com/kjonmcleod/Bronco_Parts010_480x360.jpg
Stock pitman arm and manual steering box (box good for core or parts only):
http://www.geocities.com/kjonmcleod/Bronco_Parts011_480x360.jpg
4 degree blue bushings (probably Duff):
http://www.geocities.com/kjonmcleod/Bronco_Parts012_480x360.jpg
Steering column (out of a 73????-manual steering-good for parts or rebuild):
http://www.geocities.com/kjonmcleod/Bronco_Parts014_480x360.jpg
Last edited: