• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Motor Mount Tower

Bator

Full Member
Joined
May 2, 2004
Messages
160
Loc.
Las Vegas
Hi guys...The PO had moved the motor mount towers and now I'm trying to put them back to the correct location for a V8. I believe the trans mount was moved also. I have those dimension for the trans mount but it keys off of the motor mount towers. I have included a jpg with the two measurements I need listed as A & B.

Any help would be greatly appreciated.

Thanx Bob
 

Attachments

  • Frame scan.jpg
    Frame scan.jpg
    22.7 KB · Views: 95

Doyle

Bronco Guru
Joined
Jun 12, 2006
Messages
1,026
Don't have the measurments here you're asking for, but if you draw a line throught the bumper bolt holes you're referencing and a line through the tranny mount holes it should be 61 inches center line to center line.
 

scsm76

Bronco Guru
Joined
Oct 6, 2005
Messages
1,433
Loc.
Shaver Lake, CA
I used the JD motor mount towers when I converted to a V8 there instructions said to put the front flat face 8.5" back from the rear flat face of the front crossmember Hope this helps.
 
Top