WA Mustang 5.0 EFI Fuel Injection Set Up $395

[broncoP]

I have a EFI System conversion. I have most parts as it came out of an early bronco. I'm not an expert on this conversion, but it was taken out of an early bronco. Previous owner said he thought it came out of a 89 Mustang 5.0.
Here's what I have:

-Complete Upper and Lower Intake Manifolds with Throttle Body
--Injector Harness
--Main Harness, looks like few connections already spliced to go into bronco.
--Fuel Rail With Injectors complete
-2 Computers, was told one was new, one serial number is
E7SF-12A650-E1A other is E8SF-12A650-A1C 8KC.
-Sensors

I can email someone pics if they want to post. Do not have fuel pumps.
How does $400 sound, new price

 

[dgold_881]

pm sent....

 

[nvrstuk]

Another PM sent...

thanks

 

[ransil]

The 8KC is a T-bird 5.0 Speed Density computer.

What color are the injectors??

 

[Ourobos]

^ True.. If it's an 89 harness it should be mass air, and those are speed density ECUs.. Just a FYI

 

[dclack]

Another PM sent...

thanks

I'm pretty sure this won't fit your 418 Brian! ;D

 

[broncoP]

If you guys can help me out with this, I don't know much about the EFI conversion.
The injector plugs are orange, injectors look off white. On the wiring harness, all I could find on it was a label saying "made in mexico" with 00H on the label as well. On the lower intake, here's what I could see, hard to read it, but,
RFE6SE 9K46105A.
I know the bronco it came out of and it definately worked in it. It was done by Traxx Automotive in B.C., where Gary Yortson used to work, he may have done this swap .

 

[dclack]

When it was in the Bronco, did it have a mass air meter in the intake? The upper and lower intakes can be used with either mass air or speed density, but the computers and harnesses are specific.

 

[dclack]

Hey broncoP, I'm throwing up the pics you sent me. It looks like there is a MAF plug on the main harness, so it should be as you said, an '89 Mustang mass air harness. The orange injectors are the standard 19 lb/hr injectors. You can check the computer codes here to see what vehicle they came from. You just need the 3 or 4 digit code.

 

[broncoP]

Bump for new price. $395