need help mounting 3-point harness on rollbar

[ObscureMachine]

I have the 3 point harness from WH. My roll bar doesn't have any mounts welded on for attaching the upper point. So, is it safe to just drill through the rollbar and attach it? Should I weld on some type of bracket? Where would I get those?

Thanks!

JiM

 

[Ed74]

I had some link tabs welded to the main hoop of my roll bar. I purchased them from COR. Here is the link:
http://completeoffroad.com/c-59816-accessories-roll-cage.html

Good luck!

 

[ObscureMachine]

Hey thanks! That's a big help! You don't happen to have any pictures, do you?

 

[br0nc0xrapt0r]

good call you never want to drill holes unless its absolutely necessary.

 

[Ed74]

I can email you some pics. What is a good email address?

 

[Ohio Bill]

Suggestion!
Have some one hold the belt over your shoulder to where it would mount and feel comfortable then mark for the tab to welded on. That's what I have planned on mine.

 

[Mark]

Obscure, please post up the pictures when you get them.
Thanks

 

[Ed74]

The WH seat belts come with instructions on how high to mount the harness. I will send some pics once I receive an email from Obscure

 

[ObscureMachine]

send the pics to email.jho@gmail.com and I'll post em when I get them!

Thanks!

 

[brian72]

A lot of folks have drilled thru the tube...but if doing that make sure you sleeve the hole that the bolt will run thru.

 

[ObscureMachine]

Here's the pics Ed sent me: