Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
I am assembling new body from aftermarket panels. Need some help locating the headlight high low beam switch and where the parking brake cable comes through. Would like to keep them in stock location.
If you take the centerline of the e=brake mounting holes on the firewall and go straight down that will be the inboard measurement for the hole in the floor.
In general 3 1/4" in from kick panel and 2 1/8" down from bend at firewall.