NV3550 Clutch and pressure plate

[rockingm82]

Next project install the NV3550.

I have a partial Advance Adapter kit. I need a new clutch disc and pressure plate.

Can anyone provide part numbers or verify the ones I have.

I believe the Clutch Disc that comes with the kit it a Centerforce 383735 https://www.summitracing.com/parts/ctf-383735
Will the dual friction Centerforce DF383735 https://www.summitracing.com/parts/CTF-DF383735 work?

What I can't figure out is the part number for the pressure plate. Anyone know?

 

[blubuckaroo]

The pressure plate is the same one that is used on the three speed.
I used the Centerforce II pressure plate to go with the disc that came with the kit from Toms.
To me it looks more appropriate to out use than their Dual Friction. My reasoning is more friction material is better.
https://www.summitracing.com/parts/ctf-cft260000/all/year/1976/make/ford/model/bronco

 

[rockingm82]

blubuckaroo,

Thanks for the reply. So what throw out bearing did you use?

 

[blubuckaroo]

I just used the same Centerforce brand.
https://www.summitracing.com/parts/ctf-n1439/all/year/1976/make/ford/model/bronco

I considered using one of the greaesable throwout bearings, was concerned about excess grease getting into the clutch.