Old Dodge Trucks and Ford tr.

[Pa PITT]

...1972 cab and half non running 318 auto no seats ...camper special ...still have the camper special bed ..Pass side has tool box in the lower side...
....1974 or so D100 single cab no motor no rear axle ...inside not complete ..
....1978 Nice yellow and white 4x4 cab stripped but has doors and glass ..also have the front finder clip yellow and white nice for that model ...No hood...no frame...
.....And my treasure ...a 1978 Warlock...very stripped cab and then the front fenders wrecked in the frontend ...the hood ...Hood and fenders are bent but they could be fixed ...but mostly all have the original strips on them ...No one but ''DIRTY' & ME knows what the stripes really look like ..I don't have the doors...I let a boy that worked for me have the doors to build a warlock ...and the little shit painted my doors white ..He lied to me...I'm still mad about that...The rear fenders will have the same repeat squirlEque on the back fender as the front ....
.....and a 400 with about $1000 of parts in it at one time but it only ran about 500 miles ..It's inside my shop..and maybe 2 big block 727 trans..all to rebuild..
....A set of used 440 or big block Tr headers...old but only 500 miles on them ..
....AND A PAIR of 440 Big Block Motor Mount towers ...for 4 Wheel DRIVE..These are supposed to be worth about $500.00 by them selves...Originals ...Yes their for sale so I can feed my Bronco projects !!!
......1 1986 Ford truck heavy half long bed ... doors are junk because their on my 1980 Bronco ..Bed has so so tailgate ..Brown and white ...
....1986 Ford 1/2 Dark Blue long bed so so ..has tail gate ...extended cab ...This truck was stolen and the Vatos took the good off it and put their shit back on it to toe it out on a hwy and leave it ...But my Buddy caught them himself ..Cops were no help ..It still has hood and fenders in the bed ...302 aod ......
.....1973 Mustang II...I got this car for a street rod but have never found the rest ...it was a bucket seat model with auto console tilt wheel power steering rack and pinion ..We pulled a v8 out of it but it has 4 bolt wheels ..4Wheels match ...Everything except the hood ..no motor or trans either ..
......1973 Vega has 2 good doors ...and has the steering gear box ..I used parts off this for a Vega street rod I had 302 chevy 12.5 pistons 2 holleys a scoop about 12 inches tall ...Corvette Yellow ...Black Skunk Strips over hood top and trunk ..Chrome 4 inch cragers up front and 10's on the back ..Black inside Morruso cage ...raidiator ...front coils..motor mounts ..Seems like some more ...400 Turbo and a Hurst shifter ....This was back when I had my parts house ...I really had nothing in this project people brought stuff to me to trade for parts ..I might have had $1000.00 in it ...Then at income tax time a kid came in and plunked down 3500 green ones ...Thanks ...
...I never got to drive it ...sounded great ...

 

[Pa PITT]

more papitts farm stories

...That one got so long I'LL add a little more ...
....A very used 4.0 L 80+ Exploder motor for parts ..knocking ..
.....2.9 L 88 Bronco II motor this one should have good heads ..Very hard to find ..Customer said it knocked but the mech couldn't hear the knock but change it for them ..Complete ...
......300 6 cyl pan ...
......DUKES OF HAZZARD COP CAR very stripped ...Green ...Have title I think..
.....1980 complete Bronco Very rough 300 cid 4 speed ..has 355 rear it howls and leaks ..Needs carb I put about 5 on it this winter but could never get on to run ...Has 387.000 miles on it and 3 bullets hole in it ...Don't ask about 2 of them ...PO GOT THE CHERRY.....I also found a 300 cast iron Bell housing I think in the shop when I was looking for the 440 bell housing that started this thread ..
.....Broncos since I'm listing my stuff...someone ask what I had ..
.....1965 mostly complete very rough Bronco white ..When I bought this one he said it needed a fuel pump ...Ya right ...Very red neck ..no front drive shaft ..front diff is drained now it looked like chochlot milk ...fender cut ...and rusty tailgate very rusty ...different seats ..no back seat different full top ...thats what I got my 1/2 cab off of ...Has a 170cid .No wheels on that one ..
.....1968 rebuildable was rolled ..has 1/2 fiberglass top not on when rolled 355's dana 30 I think this one and 351 in it it might be 302 has ran in about 5 years ..door bent.. hood bent ..front fender has light hickes ..But still sets level ...no seat ...Steering column not good ..3 speed I think ...Do have the title for this one ..$1500.00 for this one ...
.....1976 This one I keep wanting to start another project ..It was rolled kid was killed in this one ..VERY good tail gate ..RED 355's no door ..their there but very bent ..Needs one driver side door rear post ...has a 4 inch dent in rear extension ..Window shield frame tore off but I have another..needs hood but I have another yellow hood ..needs front fenders fixed ..good grill and stock front bumper ...has 3 speed not sure on the motor ....Front 44 very bad BUT HAVE A dana 30 411 p/trac I could use in it ...Dash would have to be rewired...and would need a steering column ...and gear box is missing ..
.....1975 355rear axle and good back Tub ...Not much else left on this one .It was head on'd in OLd Mexico on a hunting trip my Buddy brought it back .WHY I not sure but we got lots of parts off it ......
................................................................................
...I guess all of that is for sale at some price but I don't really want to ship much ...You can ask ...But that's not my job...I work hard at my job.. but some things can be easy to get off and ship ...
.....Thanks Guys for putting up with me......
...........PS....Grand kid will be here over the weekend so I may not get back here ...

 

[TexasBronco]

Any interest in just selling the fiberglass half cab top off the 68?

 

[Pa PITT]

Yes if you willing to come look at it ..I've sold it twice and didn't stay sold but sure ..it all for sale......Some neat stuff.

 

[1owner66]

If I buy something can you store it for me for 12 years? LMAO! Too bad I'm overseas right now or I would probably be heading up there right now.

 

[TexasBronco]

Yes if you willing to come look at it ..I've sold it twice and didn't stay sold but sure ..it all for sale......Some neat stuff.

I'll look into that... won't be able to much of anything till mid/late May at the soonest do to school.

 

[Pa PITT]

No Problem most of my stuff stays here a long time...

 

[grant_71]

Dang, that is a yard sale PAPITT, if i ever got to TX with a flatbed i would be at your place in a heartbeat, what you call junk down south is cherry up here in the rust states!

 

[Pa PITT]

Grant There is some good items there for sure..I don't want to ship ..So I really don't try to sell much I'm always going to build one more....I wish I was still in the parts business..
..And I wish there was a OLd Dodge Truck sight like ours to advertise some of that stuff..

 

[ugly74]

how much for the 440 motor mount towers? I'm gonna need 'em after I blow up the 360 I'm runnin now;D
and how about the 440 headers? are they also for a 4x4 chassis?
and are the 727s a 4x4 version? (my wife is going to kill me%) )

it'd all need to be shipped though....you could always try selling it all on Dodgetruckworld.com, or RamchargerCentral.

 

[Pa PITT]

I still have it all ...