Parts for Sale

[daveweil1]

I have several parts I have pulled off my trail rig that I am upgrading.

Stock 7 blade fan and spacer: $15 plus shipping SOLD
Aluminum Radiator: $40 plus shipping SOLD
JBG Performance Harmonic Balancer (never used) $30 plus shipping SOLD
JBG Rubber quater panel to hardtop channels (NIB) $15 plus shipping SOLD
Stock 302 crank and water pump pulleys: $25 plus shipping for both
Auto Trans mini starter with solenoid: $20 plus shipping (there is some wear on the bendix gear but its new)
Pro Comp 140 gph electric fuel pump with adj regulator (3/8" NPT). $30 plus shipping. Installed for 3 weeks, then I went to 120 gph Holley
Fiberglass roadster door inserts: $80 plus shipping

I can get really cheap shipping through Fed Ex and UPS through my company. PM or email me a zip and I can quote it for you.

Heres a pic of the balancer:

 

[BroncoMark]

What's the story on the radiator? Is it Bronco specific or a universal one?

 

[daveweil1]

What's the story on the radiator? Is it Bronco specific or a universal one?

I'm not sure. It was in the truck when I bought it. It mounts with the 4 core mounts. I think it may be universal. I can take a pic when I go home for lunch.

 

[Tito]

How many groove are the pulleys? Single, I'll pass, double I'll take.

 

[daveweil1]

I believe they are double. I'll check in 20 minutes when I go home for lunch.

Here's an old pic. The water pump is single, the crank is triple

 

[Tito]

I'll pass on em, the triple tends to be a little deep for the 7 blade fan, hoping for a double on the wp too. Thanks for the quick response!

 

[panhandlebronco]

will take the balancer if you still have it.

 

[Annapolis76EB]

Interested in the balancer. Sending PM.

 

[daveweil1]

Pictures

Here's some pics of everything:

The pink Barbie mustang is not included with the inserts.

 

[BroncoMark]

Thanks for the picture of the radiator. It looks like it's set up for a mustang motor with the reversed inlet and outlets.

 

[daveweil1]

Thanks for the picture of the radiator. It looks like it's set up for a mustang motor with the reversed inlet and outlets.

The upper hose is on the passenger side/lower hose is on the driver's

 

[72_EB]

I'll take the hardtop rubber.
That's what goes between the upper quarter and hardtop. Bedrail...where it bolts down...yes?

 

[RVH]

I will take the fan. Just to confirm, it is 18'' and standard rotation?

Rob

 

[daveweil1]

I will take the fan. Just to confirm, it is 18'' and standard rotation?

Rob

Far as I know its standard. It's closer to 17.5", It was on the stock 302 when I bought the truck.

 

[RVH]

Far as I know its standard. It's closer to 17.5", It was on the stock 302 when I bought the truck.

That will work. Shipping will be to 76034. Thx.

Rob

 

[daveweil1]

I have several parts I have pulled off my trail rig that I am upgrading.

Stock 7 blade fan and spacer: $15 plus shipping SOLD
Aluminum Radiator: $40 plus shipping
JBG Performance Harmonic Balancer (never used) $30 plus shipping SOLD
JBG Rubber quater panel to hardtop channels (NIB) $15 plus shipping SOLD
Stock 302 crank and water pump pulleys: $20 plus shipping for both
Auto Trans mini starter with solenoid: $20 plus shipping (there is some wear on the bendix gear but its new)
Pro Comp 140 gph electric fuel pump with adj regulator (3/8" NPT). $30 plus shipping. Installed for 3 weeks, then I went to 120 gph Holley
Fiberglass roadster door inserts: $80 plus shipping

I can get really cheap shipping through Fed Ex and UPS through my company. PM or email me a zip and I can quote it for you.

Heres a pic of the balancer:

BTT for the reduced prices

 

[PHARMIE]

Do you have pics of the starter? If so shoot them to me if you still have it to sell pharmie28@yahoo.com.

 

[daveweil1]

Do you have pics of the starter? If so shoot them to me if you still have it to sell pharmie28@yahoo.com.

email sent

 

[daveweil1]

I still have the fiberglass door inserts. These are almost new. I'm 6'4' 260lbs and these hinder my access to the drivers seat. I've also still got the electric fuel pump and adjustable regulator.

 

[PHARMIE]

How much for the starter shipped to 24630 ? You think one could get the bendix gear fairly easy ?