Parts or whole in North East UPDATED with pictures

[2badrotties]

I have a 1972 Bronco that I am going to parts out. I may consider selling as whole. I will make a list in the next couple of days with parts and prices. Not much good in the way of body parts except the tailgate and hard top.

This was an unfinished project. New front floors, rockers, door posts, striker posts, kick panels, front inner fenders.

302 with 3 speed standard. Disc brakes ( no booster ), Big bearing rear. Engine is a remanufactured with I would guess less than 10,000 miles. Perfect frame.

This truck is very repairable but most body panels need repair or replacement. Have some extra parts also .... rebuilt 3 spd standard trans, brand new stock rear leaf springs, door skins ( two ), many other parts. I will have a list together in a few days with parts, prices, and a few pictures.

List your needs here

 

[strandlock]

parts

I have a 1972 Bronco that I am going to parts out. I may consider selling as whole. I will make a list in the next couple of days with parts and prices. Not much good in the way of body parts except the tailgate and hard top.

This was an unfinished project. New front floors, rockers, door posts, striker posts, kick panels, front inner fenders.

302 with 3 speed standard. Disc brakes ( no booster ), Big bearing rear. Engine is a remanufactured with I would guess less than 10,000 miles. Perfect frame.

This truck is very repairable but most body panels need repair or replacement. Have some extra parts also .... rebuilt 3 spd standard trans, brand new stock rear leaf springs, door skins ( two ), many other parts. I will have a list together in a few days with parts, prices, and a few pictures.

List your needs here

got any good fenders,grill?

 

[2badrotties]

The guy brought me 4 fenders but none of them are much good and all are cut for flares. I'll post a few pictures in a couple of days. I had pictures and lost them in a computer crash. I'll take some new ones maybe tomorrow.

 

[NicksTrix]

andy, keep me posted. could be potential build up material if price is right.

 

[1975stroppebaja]

Way to go 2Bad... I for one am glad to see this ;D

 

[yfz450sew]

I need power steering parts if you've got them. Thanks

 

[strandlock]

parts

Can I come see whatcha got?

 

[2badrotties]

Can I come see whatcha got?

Sure can but you better bring money in case you want it ;D

 

[strandlock]

ggg

Sure can but you better bring money in case you want it ;D

Just let me know when your available and ill get there
Thanks,Pat

 

[ken75ranger]

Just let me know when your available and ill get there
Thanks,Pat

You're starting your own Bronco collection aren't you.

 

[tasker]

Well bring a few over here the end of the month. Would love to come check out your stuff too, but might be a few weeks before i can. Good luck and if not i'll be intouch.

 

[2badrotties]

I took a few pictures but it is really tight in my garage so I could only get one side. Driver side door is junk. You need at least a door to skin but this one is rusted bad on the bottom and where hinges bolt on. Picture of cowl is where I cut out some rust and replaced with a section on another cowl top. The seams on rear quarter panels is good as are the tail light panels. Front seats are pretty good - no rear seat. There are 4 large fiberglass flares with it ( same size as war flares ). Windshield frame is good and I have a extra. Tires are good. This truck runs and drives but has been sitting for at least this past year. Four fenders but all need some work. Great tailgate, hard top is good. Two door skins are new so if you have doors with no rust but lots of dents these will help. Radiator support needs patch on bottom edge.

This is a great project truck to fix up and drive around but would need a LOT of work to be show worthy.

I'd like to get $2000 for it but I'm open to offers

 

[tooqk4u22]

What is condition of the rest of the tub wheel wells, rear bed, etc.

 

[DonsBolt]

I think someone would be crazzy not to buy it the way it sits. Though if you can't find a buyer for it, and part it out, I might be interested in the tailgate.

While mine isn't rusted at all, one time the spare tire unlatched, and hit pretty hard when I hit the brakes, hehe.

So keep me in mind for the tailgate, but I sure hope it doesn't get parted out

 

[73AnneBoleyn]

if that door is junk, what does that make mine??

what kind of disc brake conversion do you have on it?

 

[2badrotties]

Hmmmmmmm no serious interest ? Tom from Bronco Ranch asked if I'd take $1700 and I said come and get it but we never got together on the phone. I want this thing out of my garage !


Just to make things clear ... I have paperwork from DMV for this Bronco. If you live in N.Y. and want to register it you won't have a problem with this paperwork. If you live OUT OF STATE I will need to register it in my name and then sign it over unless you just want to parts it out. I'll register it in my name for the $100 DMV registration fee

 

[tasker]

Where abouts are you in relation to NYC? or better yet NH?

 

[tml]

I'd be very interested if you could get to me across the border at Hogansburg???

 

[2badrotties]

Where abouts are you in relation to NYC? or better yet NH?

I'm near Albany N.Y. 150 miles north of NYC

 

[Heus33]

Hey I used to work at GE R&D in Niskayuna! Bump for a good cause!