Pictures of a LUBR (Lifted Uncut Bronco)

[cgbexec]

I believe I am going to build a LUBR with either 31s or 33s. I need the following to help decide how I am going to proceed.

1) Side Profile Picture
2) Size & Brand of Lift if any.
3) Size & Brand of Tire.
4) Rim Manufacturer, Size including backspacing if possible.

Thanks in advance.

Chris B.

 

[Heus33]

Here's a couple of links to get you started

http://classicbroncos.com/forums/showthread.php?t=109100

http://classicbroncos.com/forums/showthread.php?t=111616

 

[stout22]

My 73

This is my 73 with a 2.5" WH lift and 31x9.50x15 on Ford aluminum slots. I think the wheels are 7 - 7.5" wide.

 

[knack]

9-32 X 16" Swamper TSL's on 7" wide Crager V-5 steel wheels with 4" backspacing. One inch body lift and 2-1/5" suspension lift. Totally untested, but looks like it will work.

 

[cgbexec]

Ok, after looking at all of these, I think I want to got tall (30" - 32") and skinny (9" wide with an agressive tread). Keep the pictures coming if you have something like this.

 

[g8rb8t]

Mine...

30x9.5x15" tires
Stock steel wheels
2.5" Suspension lift

Ok, after looking at all of these, I think I want to got tall (30" - 32") and skinny (9" wide with an agressive tread). Keep the pictures coming if you have something like this.

 

[ncsubronc]

CAGE 3.5" suspension lift
33 x 10.50 BFG mud terrain
stock steel wheels

 

[71 LUBER]

Ok, after looking at all of these, I think I want to got tall (30" - 32") and skinny (9" wide with an agressive tread). Keep the pictures coming if you have something like this.

Look into 265/70/17 MT's on a 17x8 wheel with 4.5" BS and 3.5" total lift. I'm just saying. There's not a ton of wheels out there in that size, but they are available. Some of the best looking will need the centers bored out to fit the hubs though.

http://classicbroncos.com/forums/showthread.php?t=122483&page=25&highlight=jcwalsh1 Post #363 on page 25. Check out the Blue LUBR. That's 2.5" of lift and a 255/70/17 I believe. Roughly 31". Clears at full stuff, so a 265 (32") and 1 more inch of lift should do it. The 265/17 MTR combo is what's on the new Jeeps.

 

[75 Ranger]

Chris,

I have a 3.5" suspension lift by Wild Horses. No body lift.
My wheels are M/T Alcoa Challengers 15x8 with 3.75" backspacing.
My tires are BFG AT's 31x10.50.
33's would not have worked with my set up. The tires would have hit the front edge of the rear fenders when stuffing up into the fender.

 

[cgbexec]

Chris,

I have a 3.5" suspension lift by Wild Horses. No body lift.
My wheels are M/T Alcoa Challengers 15x8 with 3.75" backspacing.
My tires are BFG AT's 31x10.50.
33's would not have worked with my set up. The tires would have hit the front edge of the rear fenders when stuffing up into the fender.

Beautiful Bronco. I may end up going 2.5" suspension lift and 1" body lift, so the 31BFGs may be the ticket. I wish they made a 31" tire in a 9.5" width however.

 

[Mac2Night]

Here's my '73:

3.5 Deaver rear springs and 3.5 Deaver coils front
33x9.5x15 BFG A/Ts
Stock rims

 

[cgbexec]

Here's my '73:

3.5 Deaver rear springs and 3.5 Deaver coils front
33x9.5x15 BFG A/Ts
Stock rims

I looked on the BFG website and I don't remeber seeing 33x9.5s. I am going to try and use the stock wheels, so skinny is the ticket.

Very nice Bronco by the way. I like the look.

 

[71 LUBER]

There's a guy that's part of the Lone Star EB club that has a LUBER on 33's. Since 9.50's have been 86'ed, I think he's running the 10.50's now and 4.5" or 5" of lift with no problems.

 

[meadowblaster]

Here is a link to a post about my bronco, good reference point for you to compare with lifted broncos, 31 10.50's on stock wheels with no lift.

http://classicbroncos.com/forums/showthread.php?t=143238

 

[KDML]

3.5" WH Suspension Lift/1" Body Lift
31x10.5x15 BFG Mud Terrain KM2s
Stock rims

 

[pikapp691]

I have this pic saved on a coulple pc's, one of my favorites for some reason!!
;D

CAGE 3.5" suspension lift
33 x 10.50 BFG mud terrain
stock steel wheels

 

[1sicbronconut]

My junk, 2.5" suspension, 1" body lift and 33" x x10.5" BFG KM2's on stock steel wheels. I also moved the quarters foward for better tire clerance.

 

[Ohio Bronco 21]

Stock Steel Wheels with 31x10.50x15 street tires, 2 1/2 inch lift (Progressive front coils and standar leafs from Toms Bronco) and a 1 inch body lift.

 

[BroncoBoy72]

3.5in suspension lift 31in BFG`s, Id like to do pizza cutters next ;D.

 

[74creamsickle]

2 1/2" Wild Horses , No body lift, 235 75 15 0n a 15X8 wheel