Power Brake Add - Kudos to HorsePower Sales

[AGShelby]

Received my kit from Horsepower Sales this week, and last night I installed it in 30 minutes (no kidding). And a good 5 minutes of this was spent cleaning the old bolts with a grinder before re-installing. I still have to bleed the lines - didn't have anyone to pump the pedal last night - but looking at an hour or so job overall.

The parts quality is great - all new - good customer service, and the price was significantly lower than the competition.

 

[Socal Tom]

What's the link? I've found about 4 Horsepower sales on the web.
Tom

 

[BroncoWanted]

They have an eBay store. Looks like they have some good deals. Just do a search on eBay for HorsePower sales bronco brakes and it should pop up.

 

[tinytim02]

What's the link? I've found about 4 Horsepower sales on the web.
Tom

Here's a link to Horsepower Sales LLC on ebay. I've gotten a bunch of brake parts from him. He's a great guy to deal with.

 

[rekoj71]

I swapped to disks with a 76-77 knuckles out conversion years ago. I didn't even know the hose/line size was different. When I needed new hoses they understood that I needed one end of the hose to fit 71 lines and the other to fit 76-77 calipers and they had them in stock, for a fair price, shipped quick, and I like thier lines much better than the factory type lines. They use a block mounted with the banjo bolt to the caliper then a fitting on that block for the hose to the line. Very slick.

 

[crankman]

The guy that runs Horsepower sales is top notch. I bought his power booster kit and i lost some small part cant remember what it was I emailed him i needed to buy it and he said no worry mailed me another.

 

[AGShelby]

Update - I messed Up - but HorsePower Sales Came to Rescue

I mistakenly took the hard lines off my order - as I thought the stock ones would work. I went to bleed the lines after bench bleeding the master cylinder - and they would not work.

I made new lines but putting new ends on my old hard lines - but they look like crap, and I have a slow dribbling leak on my front lines connector (replaced 3x...still dribble).

Talked to Dan at Horsepower- he is sending me out new lines via express mail - at a great price.

In all - a great vendor experience. I also had great service from them, and a great price/product when I did the front disc conversion last year.

Here is the link to their store:

http://stores.shop.ebay.com/HORSEPOWERSALES-LLC__W0QQ_armrsZ1