TPTFPS68
Sr. Member
I am selling my early bronco tub that I have painstakingly rebuilt. It is in epoxy and has 2k seam sealer on all the seams above and underneath. All body parts were bought thru TBP and it is easier to tell you the parts that were not replaced. From front to back...THESE ARE THE ORIGINAL PARTS ON THE TUB.....radiator support, R side firewall, trans. tunnel. seat platform, rear bed floor, rear most bed brace, L and R tail lamp housings. The lower bedsides are uncut. I built this to keep for myself but April income taxes ( yeah!) are forcing me to put this up for sale. I have tons of pics of the build. It is ready for primer surface and final blocking. I repaired any mis-alignments in the sheetmetal with a 3M product called automix 8115. It will not shrink and is a 2 part product. I then epoxied the body and filled minor imperfections with Evercoat Edge glazing putty and re-epoxied. All seams were filled with evercoat 2K control flow seam sealer. The underneath was sandblasted, epoxied, and seam sealed. Underneath is ready for paint. ONLY SERIOUS INQUIRIES PLEASE! My time is valuable too! I'm not sure what year the tub was originally but it has the wiring harness hole in the R corner of the firewall. I can send pics of anything you want. It has been sitting on the rotisserie in storage this last year. It would be best to contact me VIA phone as I don't know when I will be checking in here on Classic. My cell # is 573-473-6148 Thanks, Scott
Attachments
Last edited: