• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

rear disk brakes in progress

bushman_22

Jr. Member
Joined
Jul 22, 2010
Messages
132
Loc.
Aloha, OR
Finally getting some work done. Here is the mock up of the rear disk brakes on the full width rear 9".

Bushman
 

Attachments

  • P2040033.JPG
    P2040033.JPG
    149.5 KB · Views: 80

frenchy

Contributor
Bronco Guru
Joined
Nov 29, 2005
Messages
1,043
what rotors, calipers and caliper mounts arre you using. Looks good.

frenchy
 
OP
OP
B

bushman_22

Jr. Member
Joined
Jul 22, 2010
Messages
132
Loc.
Aloha, OR
79 f150 rear end, axle flanges turned down (very little needed), 95 f150 front rotors, 77 Lincoln Mark V rear disk brake brackets ( flipped things around to put calipers in front and retainer spring on top), National A-20 axle bearing and National 3186 seal. Plus a couple of washers to space the caliper bracket out a little further to clear the rotor. and Lincoln Mark V rear calipers

Bushman
 
Top