IN Repro early metal airbox

[broncorick]

Reproduction of early metal air box for early Broncos. Will come in Primer and made as original with spot welds, internal bracing, etc. You will need to supply your own air door, but is the same for all years. Shipping extra based on destination.

 

[MyOriginal66]

metal air box

got any pics?

 

[tailpipe]

Very interested, I would be probably be good for two.

 

[broncorick]

Here are some pictures of a finished airbox from a couple of years ago. The one with the door installed is the reproduction and it is next to an original one. Construction is of the same thickness metal and basically have you clamp it in place drill your holes for the screws or use self tapping screws and you have a functional airbox again. I generally will primer these, but I can paint them in gloss black as well. If you want to have them powder coated I will leave them in bare metal as well. Thanks if any questions give me a callOr email me.

 

[broncorick]

Pictures didn't load, will try again.

 

[broncorick]

these are pictures of an original on right and repor on left. This is a picture of one of the 3 I made a few years ago showing size and construction comparison. Still using the same pattern. If interested let me know

 

[tailpipe]

I'll take one. PM sent with address and contact info if needed.

 

[lonesomecur]

I bought one of these from him about 5 years ago. I’m very happy with it!

 

[broncorick]

Thanks!
I have not done much with the Broncos in a few years and trying to restart in the shop with these. I have a Bunch I need to restore/work on.

I bought one of these from him about 5 years ago. I’m very happy with it!