Up for sale is a used universal Ron Davis double pass aluminum radiator.
This radiator out of my project Bronco but I need a different configuration so this one is just collecting dust now. This is not a direct fit radiator for the Bronco, so some fabrication is required to install it. Nothing has ever been welded to this radiator. It has been installed in my truck for several years, but hasn't seen a ton of miles - still in good usable shape (but a bit dirty!).
Measures: 22" wide x 19" high x 3" thick, with two 1" cores. Upper connection is 1.5", lower is 1.75", both connections are on the drivers side. This was used with a fuel injected (reverse rotation water pump) 5.0L based engine.
Again, this is not a direct fit for the Bronco - you'll need to figure out mounting brackets and a shroud.
Price: $180 shipped, or $160 local pickup.
Thanks!
This radiator out of my project Bronco but I need a different configuration so this one is just collecting dust now. This is not a direct fit radiator for the Bronco, so some fabrication is required to install it. Nothing has ever been welded to this radiator. It has been installed in my truck for several years, but hasn't seen a ton of miles - still in good usable shape (but a bit dirty!).
Measures: 22" wide x 19" high x 3" thick, with two 1" cores. Upper connection is 1.5", lower is 1.75", both connections are on the drivers side. This was used with a fuel injected (reverse rotation water pump) 5.0L based engine.
Again, this is not a direct fit for the Bronco - you'll need to figure out mounting brackets and a shroud.
Price: $180 shipped, or $160 local pickup.
Thanks!
