Saginaw pump upgrade what will I need to buy?

[Bronco351]

want to upgrade to the saginaw power steering pump but can't figure out what I will need?

will the saginaw pump bolt up to the stock ford bracket?

is the saginaw pump used with the stock steering box?

can I order a saginaw pump locally? if so what vehicle do i reference?

thanks in advance!

 

[cs_88]

My setup.
Pump: Cardone 208606 (dual return pump)
Reservoir cap Napa
Power steering pulley: Napa 73077
Weatherhead fitting 1563 (Napa) to adapt to stock pressure line
JBG Saginaw bracket

 

[Bronco351]

so i will need to order a bracket offline?

 

[bronconut73]

They say you can mod the Ford bracket to make the Sag fit but it would be easier to just get a bracket from one of the vendors

 

[u0061914]

It is extremely easy to modify the stock bracket to fit the Saginaw pump. there is a tech article on this site. some slight grinding and make a spacer and your done.

 

[panalukes]

I bought the cardone pump 208606. Anybody have the bolt sizes I need for the 4 bolt holes on the pump? Additionally, the thread size for the shaft to seat the pulley on to the shaft?

 

[SteveL]

Forget the bolt size. But I think they're fine thread