• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Seam Sealer Choice

BruiserOutdoors

Bronco Guru
Joined
Aug 22, 2013
Messages
1,030
Its time to order some seam sealer. I am currently restored a hardtop. I will use SEM dual-mix self leveling sealer for the roof gutters, but am undecided what to use for the side panel to gutter area. My plan is to flip the top upside down and let gravity work with me to get the sealer deep into the groove.

My concerns are flex in the side panels during install and use over time. What sealer is out there that remains somewhat flexible to minimize seam sealer cracks down the road?
 

serial car restorer

Yes, I'll restore almost anything...
Joined
Aug 27, 2024
Messages
742
Loc.
Western Oregon
Tucker, this is what I've been using on mine. It comes in other colors too.

IMG_5809.JPG
 

jeffncs

Contributor
Bronco Guru
Joined
May 4, 2004
Messages
1,898
Loc.
Raleigh, NC
Personally, I use brush on seam sealer and apply with disposable chip brushes. If you’re looking for a smoother finish or want to blend the seam sealer into body panel seams or recesses….

After applying the seam sealer and while it’s still gooey (not cured or partially cured - fresher the better!), soak a clean rag with a good quality thinner. Smooth the seam sealer with the wet rag from end to end of the seam sealer. The thinner helps flatten and smooth the seam sealer surface while pressing it into the seam / gap and simplifies panel cleanup.

This trick works really well on the rear quarter seams running horizontally and vertically for a very clean, professional finish!

Wear gloves and safety glasses!
 

Jetfixr320

Jr. Member
Joined
Jun 26, 2025
Messages
134
Whatever product you go with, follow the tech sheets for best results. You should be able to find the tech sheets at the manufacturer website or if you buy from a actual supply house they should provide them.
 

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,361
I used panel bond and drilled holes in the corners for drainage. Small holes. Panel bonds sands well, takes paint and is not super hard to spread.
 
Top