KY shed cleaning

[edones06]

I have the stock rear tank and a aftermarket steel front tant out of a 72. I also have the filler necks. Was removed for a fuel cell. 200$
I have a np 435/d20 combo. The t case has some issues so your pretty much getting the trans ans adapter. Its the H pattern adapter no know issues with the trans. Was removed for a C6 203/205 200$

I also have another np435 to use for a swap its an A pattern 2wd. The out put hasnot been cut so could still be used as a 2wd if need be. Sold

Stock bronco heater box heater core and fan. I thank it all still works was removed back in the summer but cant remember last time i tryedusing the heat. 100$

I have a collection of parts for 78 and up bronco and truck mostly interior small parts ( dash trim, chrome parts nothing big) hit me up with wat your looking for i may have it

I have both front stock 72 d44 knuckles drums Spindles backing plates. All the stuff that gets removed for a disk swap. Make me a offer

 

[edones06]

Bump to top

 

[edones06]

To the top

 

[muskrat]

PM sent.

 

[edones06]

Hay man i sent u a pm back. Just makin shure it got there

 

[edones06]

To the top

 

[JDJ]

Still have the NP435 with adapter and d20? What do you mean H pattern adapter?

 

[edones06]

The bolt pattern on the rear of the trans were the adapter bolts on. The two top bolts on some 435 are close togather and on some the the same distance apart as the bottom two bolts. Around here we refer to them as the A or H pattern.

But yes i still have it

 

[JDJ]

Edones, can you send me a pic of the tans and the adapter? If you can, text it to me or email it to me.

 

[edones06]

The trans is spoken for

 

[edones06]

To the top

 

[edones06]

Ill be at super cel if anybody wants any of this delivered its no problem

 

[edones06]

Im loadin up and headin out thursday nite if any body needs any of this i can throw it in the truck