Show me some seat pics

[sk1nw4lk3r]

2014 Mustang GT seats.

Welded to Corbeau seat brackets, bolted to the floor. Heating elements hooked up, manual slide and manual recline.

Looks amazing, seats comfortably.

 

[wsager]

2014 Mustang GT seats.

Welded to Corbeau seat brackets, bolted to the floor. Heating elements hooked up, manual slide and manual recline.

Looks amazing, seats comfortably.

These look very comfortable and perfect fit. Are the brackets the $100 each ones? How is access to the back?

 

[American180]

2X on what wsager asked. Did you happen to measure the seat bottom height before and after? I was wanting to use GT seats as well.

 

[sprdv1]

my 76 had some Integra seats in them that work well but don't recall the darn year...

 

[kburandt]

I've been looking at these seats from a 2016 mustang.

I went to look at these. They clearly had come out of a flood car (Houston). The guy was trying to pass them off as working seats.

 

[sk1nw4lk3r]

These look very comfortable and perfect fit. Are the brackets the $100 each ones? How is access to the back?

Yes sir. Access to the back is easy- Mustang seats fold forward for access to the back seat, and the slide on the Corbeau brackets is a pretty long range of travel. Slide it forward some, tilt the seat forward, climb in.

Or, since the top is rarely on, climb over the quarter panel lol.

 

[sk1nw4lk3r]

2X on what wsager asked. Did you happen to measure the seat bottom height before and after? I was wanting to use GT seats as well.

So, the brackets from the Mustang were tall, but you can easily cut the majority of it off, to weld the corbeau bracket directly to the seat bottom.

 

[Stock Farm]

These are from a BMW 135i; powered, heated...
The rear seat I had to modify the farme to fit - still working on it and I think it will work.
Big challenge is to get the heat to work, BMW uses a k-bus to communicate seat options from the switch....this I may not be able to duplicate, we'll see.

Very comfortable and sit pretty low.

Sonny V

 

[Stock Farm]

The rear seat frame, ready for the original upholstery...will update once it's complete; again this is from a BMW 135i.

 

[BigB]

2014 Mustang GT seats.

Welded to Corbeau seat brackets, bolted to the floor. Heating elements hooked up, manual slide and manual recline.

Looks amazing, seats comfortably.



How hard would it have been to not use the brackets?

Is there a reason you didn't hook up the electric function for slide etc?

Thanks.

 

[sk1nw4lk3r]

2014 Mustang GT seats.

Welded to Corbeau seat brackets, bolted to the floor. Heating elements hooked up, manual slide and manual recline.

Looks amazing, seats comfortably.



How hard would it have been to not use the brackets?

Is there a reason you didn't hook up the electric function for slide etc?

Thanks.

Wouldn't have been hard, ultimately, aside from needing to manufacture something to mount it to the stock seat locations.

The electric functionality took up a lot of space underneath the seat, raised the height of it tremendously, I would have been sitting and looking at the top of the windshield frame (it doesn't help my cause that I am 6'4", so I need all the headroom I can get)

 

[JefeAZ]

2005 Mustang V6 seats in mine, I think they were $30 or 40 each at a local yard. Bolted the sliders right to the body after removing the stock bracketry. Had them reupholstered in a nice vinyl

 

[kburandt]

2014 Mustang GT seats.

Welded to Corbeau seat brackets, bolted to the floor. Heating elements hooked up, manual slide and manual recline.

Looks amazing, seats comfortably.

Looks great. How did you disable the airbags?

 

[sk1nw4lk3r]

Looks great. How did you disable the airbags?

The airbags are controlled by the original vehicles' PCM. Without one of those, they won't deploy.

But if you're nervous about it, you can just clip the wire.

 

[sk1nw4lk3r]

2005 Mustang V6 seats in mine, I think they were $30 or 40 each at a local yard. Bolted the sliders right to the body after removing the stock bracketry. Had them reupholstered in a nice vinyl

This is a good option, because you found manual sliding Mustang seats. I had to go with the Corbeau sliders for mine because I found Power seats.

 

[Pops68]

Just an FYI, the fox body Mustang seats are manual sliders on both sides, too. The only electrical is the lumbar support - hooked up on drivers side, but not on passenger side (yet).

 

[wsager]

2005 Mustang V6 seats in mine, I think they were $30 or 40 each at a local yard. Bolted the sliders right to the body after removing the stock bracketry. Had them reupholstered in a nice vinyl

I like that upholstery job. What did you use on the plastic parts? Any idea on how that will hold up?

 

[JefeAZ]

This is a good option, because you found manual sliding Mustang seats. I had to go with the Corbeau sliders for mine because I found Power seats.

Ya we also had the headrests cut down about 2" to match the fold n tumble head rests. They don't sit as tall now which is nice.

I like that upholstery job. What did you use on the plastic parts? Any idea on how that will hold up?

Hand washed all the plastic parts and then used Duplicolor interior plastic paint from OReilly. Came out great and should hold up well