MI Stock Exhaust Manifold Bolts

[Willowrun]

City: Dexter

Looking to go back to stock exhaust manifolds on my survivor '74 with 302 so looking for a full set of good condition but aged exhaust manifold bolts.
Thanks

 

[Bronco-Brian]

I've got a partial set of factory bolts - used, but if you are going for a concours look, best bet is to buy AMK bolts new. These match factory exactly, and you don't risk breaking 50 year old hardware. Check out NPD p/n #9432-5A. Good luck.

 

[Willowrun]

I've got a partial set of factory bolts - used, but if you are going for a concours look, best bet is to buy AMK bolts new. These match factory exactly, and you don't risk breaking 50 year old hardware. Check out NPD p/n #9432-5A. Good luck.

I will do that. Thank you!

 

[Bajabrewer]

I'm not sure if your Bronco has 1 stud bolt or 4 studs but JBG lists both.

https://shop.broncograveyard.com/Exhaust-Manifold-Hardware-Kit-V8/productinfo/10022/

https://shop.broncograveyard.com/Exhaust-Manifold-Hardware-Kit-V8/productinfo/10024/

 

[Bajabrewer]

Just noticed the "Detailed Description" and your 74 should use 1 stud bolt

https://shop.broncograveyard.com/Exhaust-Manifold-Hardware-Kit-V8/productinfo/10024/

 

[Willowrun]

Just noticed the "Detailed Description" and your 74 should use 1 stud bolt

https://shop.broncograveyard.com/Exhaust-Manifold-Hardware-Kit-V8/productinfo/10024/

Great info, thank you. I hadn't thought about the rust factor with original factory bolts so will purchase new. I just couldn't see using the socket head cap screws that were on the headers I just cut up and pulled on the original manifolds I'm replacing the headers with. Jeff's is close and has been really good on customer service my last several orders so I'll order from them and go pick them up. Thanks again!