• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Stupid Windshield Gaskets

7bronco6

Full Member
Joined
Jun 4, 2008
Messages
229
Loc.
PA
So I thought I was planning ahead, i bought a new windshield gasket (dennis carpenter) not the aftermarket one. Thinking it would fit like a glove. The windshield guy came today, and he cut the glass right there on the spot, with the green stuff. Pretty cool. But anyway, when it came time to put the weatherstripping on it was way too big. Now I'm gonna have to keep a tarp on it for another week, until I can get new gasket in. :mad:

Here are my rough measurements of my old one.
55 top left to right
18 top to bottom
57 1/2 bottom left to right

New One
56 top left to right
18 1/2 top to bottom
58 left to right

How can a "OEM" product be that far off???
 

Tuck

Sr. Member
Joined
Jul 25, 2001
Messages
947
That exact thing happened to me a few years ago. Got a new seal, no issues. Still got the old one in the garage, but I haven't measured it. Maybe its metric for the foreign Broncos %)

DC usually has good stuff with great support too.
 

zeeman1

Bronco Guru
Joined
Apr 27, 2008
Messages
1,268
Loc.
Seattle
Craziness, I got one that was too big once too. Didn't have the luxury of waiting for another one so I filled the thing with silicone inside and out, stuffed it in, and it's been water-tight since. Disappointing though to get a new one that doesn't fit, pissed me off. Who is making these?
 
OP
OP
7bronco6

7bronco6

Full Member
Joined
Jun 4, 2008
Messages
229
Loc.
PA
yeah...unfortuntly I didn't get it thru DC...It's thru one of our vendors...I have to call tomorrow, and I guess there going to bitch at DC..and I'm just letting everybody know..to be cafeful of bad molds going around...thanks :)
 

deltarat

Bronco Guru
Joined
Jul 12, 2006
Messages
3,371
Loc.
Drew,Ms
I bought a part from one of the vendors that DC made and was missing some parts. I called the vendor and they pretty much said it was not their fault and would do nothing about it. I tried DC and they said it was the vendors problem since they took my money. Then he said to hold on a second and came back and asked for my address, because they were going to send me what I needed at no cost or even shipping. They are great guys.
 

rekoj71

Sr. Member
Joined
Apr 18, 2009
Messages
361
My new DC windshield gasket was about 3/4 inch too high and an inch too long. I just figured that it was rubber and may have stretched while it sat for most of a year or that mayby it was supposed to be a little big. I just kept squishing the corners toward each other as I laid it on the frame and held it squashed in place while my boy pulled the rope to get it in. I'd installed side windows in other cars but never a windshield before. I guess I just thought it was supposed to be like that and forced it to fit..... It did fit though.
 
Top