TN Super Celebration parts thread. Post what you’re bringing to sell here

[hunter1]

City: Maryville/Townsend
Price: $ 250

---

Let's get it started!

I have a roll bar with the short legs that attach to the top of the rear wheel tubs, blasted and coated in flat black epoxy. Verified it will not work with a half cab but will with full top or bikini, Upright is too straight, not slanted $150.

Also, Black Rampage soft top. Good shape, clean tinted windows, with small rip in the right rear adjacent to the tailgate (see pics), would not leak at this point. All hardware and fasteners. $250

Taillight housing repair pieces. Complete housings without the tabs. $60 for the pair (SOLD)

Windshield frame. Has some minor rust through $100. In Epoxy primer

 

[stout22]

I was wondering when someone would start this thread. I've started it several times in the past.
Folks should also post what they are looking for.

 

[Bronco John]

Anyone have any sec gen parts?


Sent from my iPhone using Tapatalk

 

[Teal68]

Let's get it started!

I have a roll bar with the short legs that attach to the top of the rear wheel tubs, blasted and coated in flat black epoxy. Verified it will not work with a half cab but will with full top or bikini, Upright is too straight, not slanted $150.

Also, Black Rampage soft top. Good shape, clean tinted windows, with small rip in the right rear adjacent to the tailgate (see pics), would not leak at this point. All hardware and fasteners. $250

Taillight housing repair pieces. Complete housings without the tabs. $60 for the pair

Bret,
I'll take those taillight housings sir! Want to settle up in Townsend, or pay ahead?

Great idea for the thread. I'll post up some parts I'm bringing too.

Thanks,
Tyler

 

[hunter1]

Settle up there is fine. You've got my number. Just give me a call when you get in town. Any day.

 

[awest5321]

Several parts I can bring to TN Super Cell
351W Edelbrock intake $290
351W oil pan pickup dip stick stiffeners $275
Hurst 3sp floor shifter brackets linkage $175
SBF hedders Patriot Performance $275
Fiberglass half cab and bulkhead $800
OEM metal half cab w/ bulkhead $400(lot of rust, no glass)
Push bar $125
Cobra Jet 429 hood scoop $125
IH Scout Dana 300 transfer case $350

 

[mock]

# StockRadius arms, no caps $80

# 2 1/2 inch front coil springs(blue)
Rear add a leaf spring
From James Duff $80

# Rear tow hitch receiver, with bolts/brackets I believe Tom’s $100

# New degreed rubber radius arm, bushings for the bracket on the frame and bolts still in original packaging, wild horses $30.

# new rear/main gas tank skid plate $40

# Adjustable radius arm drop brackets, James Duff $130.

# bikini top windshield header channel new never installed $30

Original front and rear driveshaft in good working order just replaced because of the suspension lift $30 each

OBO
https://baltimore.craigslist.org/pts/d/highland-early-bronco-parts/7836534943.html