Thoughts on Bay complete floor pan set

[mhinchliffe]

https://www.ebay.com/itm/1966-1971-...992281?hash=item21302a3159:g:HsUAAOSwIHlaYhI3

Please reference and give your thoughts on this complete floor pan set. I have reached out to Dennis Carpenter and they do not have the drivers seat section. DC is an hour drive for me and I'd like to do what I can locally so I know he'll get my order for whatever else I need and he can supply.
Are the DC parts stamped here or are the sourced elsewhere? What do any of you know about the link above?
Thx in advance

 

[Bwh0310]

WH Floor Pan

I just purchased and installed the one piece from Wild Horses. It is 2-3x more expensive than the one in the link and I was great quality. Came with all braces underneath. The one in the link is almost too cheap.


https://www.wildhorses4x4.com/product/front-floor-pan_platform-set-68-77/Bronco_Floor_Pans

 

[Skinnyr1]

The 4 or 5 piece front floor sets are commonly 300 - 350. The one piece drop in kit is twice as much, but is just that, drop in.

The ebay one looks fine to me, they all come from overseas and need trimming of some sort. I bought my set from Tom's it was 300ish and was good quality. The only difference being the passenger side is two pieces.

 

[nickgp]

For something as permanent as welded in floor pans, I’d opt for ones from our major vendors.

 

[ngsd]

I just finished mine. Never again would I do this over the one piece. I would pay three time as much for the one piece!

 

[mhinchliffe]

All great responses. Any more...
Thx for this

 

[unimogger]

I bought the individual left and right floor pans from that seller. They were cheap, and I only thought I was going to need them for patches not full panels. They needed to have the flanges straightened and then re-bent, and the other edges trimmed. The rolled ribs were wider than stock, and not spaced correctly. If the full floor is anything like the parts I bought, I'd pass.

 

[ngsd]

The one piece floor can be bought through reputable vendors found on this site. I am always cautious buying anything on EBAY

 

[sprdv1]

For something as permanent as welded in floor pans, I’d opt for ones from our major vendors.

for sure, lot of great options/vendors

 

[sprdv1]

just personal pref but I start w/TBP and work out from there

 

[rydog1130]

as others said this is just the pans, no braces etc, fab work up to you...i did the 1 piece fully assembled and it was well worth it in my opinion.